Southwire 22956783 Thhn 14 Awg Stranded Wire 600V 50 Ft

Product Description

The SOUTHWIRE/COLEMAN CABLE 22956783 is a 50-foot spool of 14 AWG stranded copper THHN building wire rated for 600 volts and 90 degrees C. The nylon jacket provides abrasion resistance and makes pulling through conduit easier. Stranded construction gives the wire more flexibility than solid wire, which matters in tight runs or junction boxes. Electricians use this wire for branch circuit wiring in residential and light commercial applications. The white jacket color aids in circuit identification during installation and inspections.

This wire is suited for use in conduit, cable trays, and raceways where THHN is the specified conductor type. At 14 AWG, it is sized for 15-amp branch circuits under NEC guidelines. The 50-foot spool is a practical quantity for service calls, panel work, and short circuit runs where a larger reel would be wasteful. It ships on a plastic spool for organized storage and payout.

Key Features

• 14 AWG stranded copper conductor for flexibility in conduit and enclosures
• THHN designation with nylon jacket rated for dry and damp locations
• 600-volt insulation rating for standard branch circuit applications
• 90 degrees C temperature rating for higher ambient load environments
• White jacket for circuit identification per NEC color-coding practices
• 50-foot plastic spool for controlled payout and storage

Compatibility

Designed for use as a THHN-rated branch circuit conductor in conduit, wireways, and cable trays in residential and light commercial electrical systems where 14 AWG stranded copper wire is required.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize and lock out the circuit before making any connections. THHN wire must be installed in a listed raceway or conduit system -- direct burial and free-air installations require a different wire type. Verify that the wire gauge is appropriate for the breaker size and circuit load before pulling.