Southwire 1288SW0002 50 Ft 16/3 Outdoor Extension Cord 13A 125V

Product Description

The SOUTHWIRE 1288SW0002 is a 50-foot, 16/3 AWG outdoor-rated extension cord designed for use in demanding jobsite and field-service environments. Built to the SJEOOW cord standard, it carries a 13-amp, 125-volt AC rating and uses a NEMA 5-15P male plug with a single NEMA 5-15R female receptacle. The 16 AWG, 3-conductor construction handles standard 120-volt tool and equipment loads. The high-visibility yellow jacket makes the cord easier to spot on a cluttered jobsite, reducing trip hazards. Licensed electricians, HVAC technicians, plumbers, and pool service professionals frequently keep cords like this on their service vehicles for powering portable tools and equipment at the point of work.

This extension cord is suited for outdoor use in residential and light commercial applications. Typical uses include powering portable power tools, work lights, compressors, and test equipment at job sites where a permanent outlet is not within reach. The SJEOOW jacket rating means the cord is oil-resistant, water-resistant, and rated for outdoor exposure, making it appropriate for use in wet or damp conditions common on active construction and service sites. The 50-foot length provides adequate reach for most single-trade service scenarios without requiring a second cord.

Key Features

• SJEOOW jacket rated for outdoor, wet, and oil-resistant environments
• 16/3 AWG construction with 3 conductors supports grounded 120-volt equipment
• 13-amp, 125-volt AC capacity handles standard portable tool loads
• NEMA 5-15P plug and NEMA 5-15R receptacle for compatibility with standard 15-amp outlets
• High-visibility yellow jacket for jobsite safety
• UL Listed and CSA Certified; meets OSHA standards

Compatibility

Designed for use with standard NEMA 5-15 grounded 15-amp, 125-volt receptacles and equipment. Suitable for grounded portable tools, work lights, and electrical test equipment rated at or below 13 amps at 125 volts AC.

Installation Notes

Extension cords of this type are deployed by electricians and general trades for temporary power only and are not intended as permanent wiring. Inspect the cord before each use for cuts, abrasion, or damaged insulation; do not use a damaged cord. Keep the cord fully uncoiled during use to prevent heat buildup, especially under continuous or near-rated loads. Use in compliance with OSHA 1926.405 requirements for temporary wiring on construction sites.