Southwire 11601201 Thhn Thwn 10 Awg 30A 500ft Solid Copper Wire

Product Description

The SOUTHWIRE 11601201 is a solid-core copper building wire rated for THHN and THWN applications, designed for installation in conduit in commercial and residential electrical systems. Sized at 10 AWG with a 30-amp capacity and a 600-volt rating, this wire features thermoplastic insulation with a nylon jacket in a distinctive orange color for easy identification during rough-in and inspection. Each reel provides 500 feet of continuous wire. Licensed electricians install this wire in branch circuits, panel feeders, and conduit runs where a reliable solid-conductor product is required.

This wire suits interior and wet-location conduit installations. The THHN rating covers dry and damp locations, while the THWN rating extends suitability to wet environments, making it appropriate for conduit runs that pass through unconditioned spaces, mechanical rooms, or areas subject to moisture. The orange nylon jacket aids circuit identification in multi-wire conduit bundles. At 10 AWG solid, it is commonly used for 30-amp branch circuits including dryer circuits, HVAC equipment feeds, and similar loads in both residential and light commercial work.

Key Features

• Dual THHN/THWN rating covers dry, damp, and wet conduit locations
• 10 AWG solid copper conductor rated at 30 amps and 600 volts
• Thermoplastic insulation with nylon jacket resists abrasion, heat, moisture, oil, and gasoline
• Maximum operating temperature of 194 degrees F
• Orange jacket color for straightforward circuit identification in conduit
• 500-foot continuous length minimizes splices on longer runs

Compatibility

Designed for use in conduit systems where THHN or THWN-rated solid copper building wire at 10 AWG is specified. Suitable for standard 30-amp branch circuit applications in residential and light commercial electrical installations.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize and lock out the circuit or panel before pulling wire or making terminations. This is a solid-conductor wire intended for conduit installation — do not use in applications requiring stranded flexible conductor. Verify conduit fill calculations per NEC Article 310 before pulling multiple conductors through a single raceway.