Southwire 11593101 Thhn Thwn 12 Awg 20A 500ft Solid Copper Wire

Product Description

The SOUTHWIRE 11593101 is a solid-core, single-conductor THHN/THWN building wire rated for 12 AWG at 20 amps and 600 volts. It ships in a 500-foot length and is constructed from copper with a thermoplastic insulation and nylon jacket in orange. The orange jacket aids circuit identification during rough-in and inspection. Rated to a maximum operating temperature of 194 degrees F, this wire is suitable for use in conduit in both dry and wet locations. Electricians use this wire for branch circuit wiring in residential and light commercial applications.

This wire is installed in conduit runs for standard 20-amp branch circuits, including kitchen, bathroom, laundry, and general-purpose circuits in residential construction and light commercial buildouts. The THHN/THWN dual rating makes it appropriate for both dry and wet conduit environments. The solid core construction is the standard choice for conduit pulls in shorter runs and device terminations where stranded wire is not required. The orange jacket color follows common color-coding conventions for 12 AWG circuit identification on job sites.

Key Features

• THHN/THWN dual-rated for use in dry and wet conduit installations
• 12 AWG solid copper conductor rated at 20 amps and 600 volts
• Thermoplastic insulation with nylon jacket for abrasion and moisture resistance
• Resistant to abrasion, gasoline, heat, moisture, and oil
• Orange jacket for 12 AWG circuit identification
• 500-foot spool suitable for residential and light commercial branch circuit runs

Compatibility

Designed as a standard THHN/THWN 12 AWG branch circuit wire for use in conduit systems in residential and light commercial electrical installations.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Power down and lock out the circuit panel before terminating or splicing wire. THHN/THWN wire must be pulled through listed conduit; do not install as open wiring. Ensure all terminations at devices, breakers, and junction boxes are properly rated for the conductor size and torqued to the device manufacturer specifications.