Southwark Metal 27R_2-1/4X14X6 Sheet Metal Pipe Boot

Product Description

The SOUTHWARK METAL 27R_2-1/4X14X6 is a straight sheet metal pipe boot designed to transition ductwork from a round collar to a flat register opening. Fabricated from hot dip galvanized steel, it provides corrosion resistance suitable for residential and light commercial HVAC duct systems. The boot measures 2.25 inches by 14 inches at the register face (Size A) and accepts a 6 inch diameter round collar at the takeoff end (Size B). HVAC installers and sheet metal contractors use this fitting to terminate supply or return duct runs at floor, wall, or ceiling register locations.

This straight pipe boot is used in forced-air heating and cooling systems where round duct transitions to a rectangular register opening. Typical installations include residential new construction and retrofit duct work where a clean, rigid transition fitting is required at the register end. The straight configuration suits applications where the duct approaches the register face without an offset. Compliance with ACCA and SMACNA standards makes this fitting appropriate for professionally designed duct systems.

Key Features

• Hot dip galvanized steel construction for corrosion resistance in duct applications
• Straight register-type configuration for direct duct-to-register transitions
• 2.25 inch by 14 inch register face opening (Size A)
• 6 inch diameter round collar connection (Size B)
• Meets ACCA and SMACNA applicable standards

Compatibility

Designed as an OEM-style sheet metal duct fitting compatible with 6 inch round duct systems terminating at a 2.25 inch by 14 inch rectangular register opening in residential and light commercial forced-air HVAC installations.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified sheet metal contractors. Power down the air handling unit and verify the system is de-energized before beginning duct work. Secure the boot to round duct using sheet metal screws and seal all joints with UL 181-rated mastic or foil tape per SMACNA guidelines. Follow local mechanical codes and ACCA Manual D duct design requirements for proper fitment and airflow performance.

Technical Specifications

• Material: Hot Dip Galvanized Steel
• Register Face Size (Size A): 2.25 inches x 14 inches
• Round Collar Diameter (Size B): 6 inches
• Type: Register, Straight
• Applicable Standards: ACCA, SMACNA

Standard Information

• Brand: SOUTHWARK METAL
• Manufacturer Part Number: 27R_2-1/4X14X6