Southwark Metal 24R_6X10X8 Pipe Boot Elbow 6x10x8

Product Description

The SOUTHWARK METAL 24R_6X10X8 is a 90-degree sheet metal pipe boot elbow designed to transition from a rectangular duct opening to a round pipe connection. Constructed from hot dip galvanized steel, this fitting provides corrosion resistance in both residential and light commercial HVAC duct systems. It connects a 6 inch by 10 inch register face to an 8 inch round collar, making it a practical solution where a duct run must change direction at a floor, wall, or ceiling boot. HVAC sheet metal installers and mechanical contractors work with this fitting when laying out supply air distribution systems that require a register-to-round transition with a 90-degree offset.

This pipe boot elbow is suited for supply air register applications in forced-air heating and cooling systems. The rectangular face dimensions of 6 inches by 10 inches accommodate standard register sizing, while the 8 inch round collar connects to round duct or flex duct. It is appropriate for new construction rough-in work and retrofit duct modifications where a right-angle transition fitting is needed at a floor or sidewall register location.

Key Features

• Hot dip galvanized steel construction provides corrosion resistance for long-term duct system service
• 90-degree elbow geometry transitions airflow from horizontal duct run to vertical register plane
• 6 inch by 10 inch rectangular register face fits standard residential register openings
• 8 inch round collar connects directly to round pipe or flexible duct
• Manufactured to ACCA and SMACNA applicable standards for duct fabrication

Compatibility

Designed as an OEM-style sheet metal fitting for residential and light commercial forced-air duct systems requiring a rectangular register-to-round pipe transition at a 90-degree angle.

Installation Notes

Installation should be performed by a licensed HVAC technician or sheet metal mechanic following SMACNA duct construction standards and local mechanical code requirements. Shut down the air handling system and verify the unit is de-energized before cutting into or modifying existing ductwork. Seal all joints with listed duct sealant or metal foil tape rated for HVAC applications to maintain system static pressure. Secure the round collar to connected duct with sheet metal screws and support the fitting per local code requirements.

Technical Specifications

• Material: Hot Dip Galvanized Steel
• Register Face Size (Size A): 6 inches x 10 inches
• Round Collar Diameter (Size B): 8 inches
• Elbow Angle: 90 degrees
• Type: Register, 90 Degree Elbow Pipe Boot
• Applicable Standards: ACCA, SMACNA

Standard Information

• Brand: SOUTHWARK METAL
• Manufacturer Part Number: 24R_6X10X8