Simpson Strong Tie H10A Hurricane Tie Rafter Connector 50pk

Product Description

The SIMPSON STRONG TIE H10A is a galvanized steel hurricane tie designed to secure rafters to the top plate, creating a continuous load path that resists uplift forces from high winds and seismic events. Sold in a pack of 50 units, this connector is a code-required fastening component in many residential and light commercial framing applications. Each tie installs with eight 8d x 1-1/2-inch nails driven into both the rafter and the top plate, delivering maximum holding power at each connection point. The corrosion-resistant galvanized coating extends service life in exposed or treated-lumber environments where bare steel would degrade.

The H10A hurricane tie is used in wood-frame construction where rafter-to-top-plate connections must meet uplift resistance requirements. Typical applications include residential roof framing, garage structures, and light commercial wood-frame buildings subject to high-wind or seismic design criteria. The connector is installed during rough framing and is commonly specified by structural engineers and building inspectors in wind-zone and seismic regions. It is a standard component in projects required to comply with IRC or IBC lateral and uplift connection provisions.

Key Features

• Secures rafter to top plate for continuous uplift resistance against wind and seismic loads
• Requires eight 8d x 1-1/2-inch nails per connection for full rated holding power
• Galvanized coating provides corrosion resistance in exterior and treated-lumber environments
• Sold in a 50-count pack suitable for full framing projects
• Compact profile fits standard rafter-to-plate geometry without interfering with sheathing

Compatibility

Designed as an OEM-style structural connector for use in standard dimensional-lumber wood-frame rafter-to-top-plate connections in residential and light commercial construction.

Installation Notes

Installation is performed by licensed framers or carpenters during the rough framing stage. Fasten with the specified 8d x 1-1/2-inch nails into both the rafter and the top plate as directed by the connector orientation. Always verify local building code requirements and any engineer-of-record specifications before installing structural connectors. Do not substitute nail size or count, as reduced fastening will compromise the rated load capacity of the connection.