Sharkbite UC370LFA10 3/4 Inch Brass Barb Tee Pex 10 Pack

Product Description

The SHARKBITE/CASH ACME UC370LFA10 is a lead free brass barb insert tee designed for joining three sections of 3/4 inch cross-linked polyethylene (PEX) tubing. This fitting is sold in a 10-pack and is constructed from lead free brass, with wetted surfaces containing less than 0.25% lead by weight. It meets NSF/ANSI Standard 14-2009, ASTM F1807, and ANSI/NSF Standard 61 Annex G, making it suitable for potable water transport systems. Licensed plumbers and pipefitters install this fitting in residential and light commercial PEX plumbing systems where a tee connection is required.

This fitting is used in residential and commercial plumbing applications where 3/4 inch PEX tubing must be joined at a tee junction. It is compatible with standard PEX cinch clamp and copper crimp ring installation methods. The UC370LFA10 is appropriate for use in hydronic, domestic hot and cold water distribution, and radiant heating systems that use 3/4 inch cross-linked polyethylene tubing. Its lead free construction makes it compliant for installation in California under AB1953 and in Vermont under VT S152 low lead restrictions.

Key Features

• Lead free brass construction with less than 0.25% lead by weight on wetted surfaces
• Connects three pieces of 3/4 inch cross-linked polyethylene PEX tubing
• Compatible with cinch clamp installation using cinch clamps and cinch tool
• Compatible with copper crimp rings and crimp tool installation method
• Immediately testable to well over 100 psi after installation
• Meets NSF/ANSI 14-2009, ASTM F1807, and ANSI/NSF 61 Annex G for potable water service

Compatibility

Designed for use with 3/4 inch cross-linked polyethylene PEX tubing. Installation requires cinch clamps with a cinch tool, or copper crimp rings with a crimp tool. Compliant with AB1953 California and VT S152 Vermont low lead requirements for potable water applications.

Installation Notes

Installation of PEX barb insert fittings is performed by licensed plumbers in accordance with local plumbing codes and IPC guidelines. Shut off the water supply and relieve system pressure before cutting into existing lines. Barb ends must be fully seated into the PEX tubing before applying cinch clamps or copper crimp rings with the appropriate tool. Do not use this fitting with CPVC or copper tubing without confirming the correct adapter fitting type.