Sharkbite SS3088FLEX24LF Water Heater Connector 3/4in Fip 24in

Product Description

The SHARKBITE/CASH ACME SS3088FLEX24LF is a 3/4-inch FIP by 24-inch stainless steel flexible water heater connector designed for potable and hydronic water distribution systems. Constructed of brass with a stainless steel outer flex body, this connector is certified to 200 psi and 200 degrees F. It features SharkBite push-fit end connections compatible with copper, CPVC, and PEX tubing, with an integral tube liner included. The lead-free construction meets Federal Law 111-380 requirements. Licensed plumbers install this connector during water heater replacements and service calls in residential and light commercial settings.

This connector is suited for water heater installations where a flexible, code-compliant supply line is required. The 3/4-inch FIP fitting size is standard for residential tank-style water heater connections. The SharkBite push-fit end accepts copper, CPVC, and PEX tubing without soldering, crimping, or clamps, making it a practical choice for fast service work. It is certified for underground applications as a manufactured joint without requiring an access panel, adding installation flexibility in tight or enclosed spaces.

Key Features

• Stainless steel flexible body rated to 200 psi and 200 degrees F
• Lead-free compliant per Federal Law 111-380
• SharkBite push-fit end works with copper, CPVC, and PEX tubing — no soldering required
• Integral tube liner included for full push-fit compatibility
• Certified for underground applications as a manufactured joint without access panel
• IAPMO listed and certified for potable and hydronic water distribution
• Design certified to ANSI 1061/NSF 61 standards and meets IAPMO PICA and CUP requirements

Compatibility

Compatible with copper, CPVC, and PEX tubing at 3/4-inch copper tube size. Designed as an OEM-style replacement flexible water heater connector for residential and light commercial water heater installations using 3/4-inch FIP supply connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and allow the water heater to cool before disconnecting existing supply lines. Hand-tighten FIP connections first, then use a wrench to snug — do not over-torque the stainless flex body. Verify push-fit tube ends are cut square, deburred, and fully seated before pressurizing the system.