Sharkbite/cash Acme 30YE555572B Gas Connector 5/8 in Od 72 in

Product Description

The SHARKBITE/CASH ACME 30YE555572B is a 5/8-inch OD flexible gas connector rated for gas appliances drawing up to 86,000 BTU/h. It measures 72 inches in length and terminates with 3/4-inch FIP fittings on each end, making it a direct-connect solution between a shut-off valve and a gas appliance. The connector is finished with an epoxy coating that resists corrosion, chemical stains from common household cleaning products, and UV exposure. It is approved for both indoor and outdoor installations. Licensed plumbers and gas fitters install this connector as part of final gas appliance hookups in residential and light commercial settings.

This connector is suited for use with gas ranges, boilers, and other high-usage gas appliances. The 72-inch length provides enough slack for a range of installation layouts where the appliance must sit at a distance from the gas supply valve. The 3/4-inch FIP fittings on both ends are a standard thread size commonly found on residential gas shut-off valves and appliance inlets. Each unit ships as a single connector with two 3/4-inch FIP fittings included in the package.

Key Features

• Rated up to 86,000 BTU/h for gas ranges, boilers, and high-usage appliances
• 72-inch length with 5/8-inch OD flexible body
• 3/4-inch FIP connections on both ends, included in the package
• Epoxy coating resists corrosion, UV exposure, and common household chemical stains
• Approved for indoor and outdoor installation

Compatibility

Designed to connect most major brands of gas ranges, boilers, and high-usage appliances to a standard shut-off valve. Certified for use with most ranges and boilers with gas ratings up to 86,000 BTU/h.

Installation Notes

Installation must be performed by a licensed plumber or qualified gas fitter in accordance with local codes and the applicable provisions of the International Fuel Gas Code (IFGC). Shut off the gas supply at the meter or main valve and verify zero pressure at the connection point before beginning work. Do not over-bend or kink the flexible connector during routing. After completing the connection, test all joints with an approved leak-detection solution before restoring gas service.