Sharkbite/cash Acme 30YE555460B Gas Connector 60 in

Product Description

The SHARKBITE/CASH ACME 30YE555460B is a 60-inch flexible gas connector with a 5/8-inch OD stainless steel body and epoxy coating, designed for connecting gas ranges, boilers, and other high-usage gas appliances to a shut-off valve. It ships with a 3/4-inch FIP fitting and a 3/4-inch MIP fitting (tapped 1/2-inch FIP), giving installers the connection options most residential and light commercial jobs require. The connector is certified for gas ratings up to 93,200 BTU/h, covering the vast majority of residential range and boiler installations. Plumbers and gas fitters rely on this connector for its corrosion-resistant epoxy finish and dual-rated indoor/outdoor approval.

This connector is suited for residential and light commercial installations where a gas range, boiler, or similarly rated high-draw appliance must be connected to a dedicated shut-off valve. The 60-inch length provides working slack for appliances that need to be pulled away from the wall for service or cleaning. The epoxy coating resists corrosion, chemical stains from common household cleaning products, and UV degradation, making it appropriate for both interior utility rooms and exterior-access installations.

Key Features

• 60-inch length with 5/8-inch OD for high-flow gas appliance connections
• Certified for gas ratings up to 93,200 BTU/h — covers most residential ranges and boilers
• Epoxy coating provides corrosion resistance and protection from household chemical stains and UV exposure
• Approved for indoor and outdoor use
• Includes 3/4-inch FIP fitting and 3/4-inch MIP fitting (tapped 1/2-inch FIP) for flexible installation options
• Sold as a single connector assembly with fittings included

Compatibility

Designed to connect most major brands of gas ranges, boilers, and high-usage gas appliances to a shut-off valve. Certified for use with most ranges and boilers operating at gas ratings up to 93,200 BTU/h.

Installation Notes

Installation should be performed by a licensed plumber or qualified gas fitter in accordance with local codes and IFGC requirements. Shut off the gas supply at the meter or main valve and verify zero pressure at the connector before beginning work. Apply an approved gas-rated thread sealant or tape to all threaded connections and check for leaks with an approved leak-detection solution after restoring gas pressure. Do not use this connector for concealed or inaccessible installations unless local code specifically permits it.