Sgs 35104 Square End Mill 0.75in 6 Flute Solid Carbide

Product Description

The SGS 35104 is a solid carbide square end mill engineered for high-performance material removal in demanding machining applications. Built on the Series 51 platform, it features a 0.75 inch diameter cutting head, a 1.625 inch length of cut, and a 4 inch overall length with a 0.75 inch straight shank. The 6-flute geometry paired with a 41-degree helix angle and variable index promotes smooth chip evacuation and reduced chatter during aggressive cuts. The Ti-NAMITE-X coating adds wear resistance and thermal protection, extending tool life when cutting hard and abrasive materials. This is a single-end, right-hand cut tool with right-hand spiral flutes manufactured from micrograin carbide substrate.

This end mill is designed for milling steel, stainless steel, cast iron, and high-temperature alloys, covering ISO material codes P, M, K, and S. It is suited for finishing and semi-finishing passes in CNC vertical and horizontal machining centers where consistent dimensional accuracy and surface finish are required. The centercutting capability allows direct plunge entry, adding flexibility in slotting and pocketing operations. Typical users include machining shops, tool rooms, and production facilities running tight-tolerance work on ferrous and heat-resistant materials.

Key Features

• 6-flute solid micrograin carbide construction for rigidity and edge retention
• 41-degree helix angle promotes aggressive material removal and smooth chip flow
• Ti-NAMITE-X coating provides heat and wear resistance in steel and high-temp alloy cuts
• Variable index flute spacing reduces harmonic vibration and chatter
• Centercutting design enables direct plunge entry for slotting and pocketing
• Right-hand cut, right-hand spiral with straight shank for standard ER and side-lock holders

Compatibility

Designed for use in CNC machining centers and manual mills with standard 0.75 inch collet chucks, end mill holders, or side-lock holders. Rated for steel, stainless steel, cast iron, and high-temperature alloys per ISO codes P, M, K, and S.

Installation Notes

Installation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and the machine is in an e-stop or lockout state before loading or removing tooling. Seat the shank to the full recommended engagement depth in the holder to prevent tool pull-out under load. Verify runout at the cutting edge before initiating a cut, as excessive runout accelerates edge wear and reduces dimensional accuracy.