Sgs 30824 Square End Mill 7/32 in 3 Flute Solid Carbide Altin

Product Description

The SGS 30824 is a single-end square end mill designed for precision milling in demanding industrial applications. Built from micrograin solid carbide and coated with Ti-NAMITE-A AlTiN finish, it delivers high heat resistance and extended tool life at elevated cutting speeds. The 30-degree right-hand spiral flute geometry promotes efficient chip evacuation and smooth surface finishes. At 7/32 inch (0.2188 inches) cutting diameter, this three-flute end mill is sized for finishing and light roughing passes where tight tolerances are required. It is installed and operated by machinists and tool-and-die professionals on CNC and manual milling equipment.

This end mill suits a broad range of workpiece materials including steel, stainless steel, cast iron, high-temperature alloys, aluminum and non-ferrous metals, and hardened materials. Its 5/8 inch length of cut and 2-1/2 inch overall length make it well matched to shallow-to-moderate depth slots, pockets, and profile cuts on production and job-shop mills. The straight 1/4 inch shank fits standard collet and end mill holder systems common on both knee mills and vertical machining centers.

Key Features

• Micrograin solid carbide construction for rigidity and wear resistance
• AlTiN (Ti-NAMITE-A) coating improves performance in ferrous, high-temp, and hardened materials
• 3 right-hand spiral flutes at 30-degree helix angle for balanced chip flow
• Center-cutting capable — supports plunge entry cuts
• Right-hand cutting direction for standard spindle operation
• Straight shank with tight shank diameter tolerance (-0.0001/-0.0004 inches) for secure tool holding

Compatibility

Designed as an OEM-style replacement and standard fitment for CNC machining centers and manual mills accepting a 1/4 inch straight shank end mill holder or collet.

Installation Notes

Installation is performed by qualified machinists or tooling technicians. Confirm spindle is fully powered down and locked out before changing tooling. Seat the shank fully into the collet or holder and torque the retention nut per the tool-holder manufacturer specifications. Verify runout with a dial indicator before initiating cutting operations, particularly given the close mill diameter tolerance of +0.0001/-0.0020 inches.