Sgs 00842 Square End Mill 0.036in 2 Flute Solid Carbide

Product Description

The SGS 00842 is a solid carbide square end mill designed for precision milling operations in metal, composite, and hard material applications. It features a 0.036 inch cutting diameter with a 0.108 inch length of cut, making it well suited for tight-tolerance slotting, profiling, and contouring work in confined areas. The 2-flute, right-hand spiral geometry with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. The bright, uncoated finish is standard for general-purpose carbide tooling. Overall length is 1.5 inches. This tool is installed and operated by machinists, tool and die makers, and CNC operators working in precision manufacturing environments.

This end mill is suited for use in vertical machining centers, CNC mills, and manual knee mills where small-diameter, fine-detail work is required. The 0.125 inch straight cylindrical shank fits standard collets and tool holders designed for 1/8 inch shank tooling. The micrograin carbide construction supports use in harder workpiece materials and higher-RPM cutting conditions. It is a single-end, non-extended-reach tool appropriate for shallow-to-moderate depth cuts within its rated length-of-cut range of 0.100 to 0.200 inches.

Key Features

• 0.036 inch cutting diameter with mill diameter tolerance of +0.000 to -0.001 inches
• 0.108 inch length of cut within a rated range of 0.100 to 0.200 inches
• 2-flute right-hand spiral flute design with 30-degree helix angle for efficient chip removal
• Micrograin solid carbide construction for rigidity and wear resistance
• Bright, uncoated finish suitable for general-purpose machining applications
• Straight-cylindrical 0.125 inch shank with h6 diameter tolerance for precise tool holder fit

Compatibility

Designed as a direct-fit replacement for standard 1/8 inch shank collet systems and tool holders accepting 0.125 inch straight-cylindrical shanks. Verify machine spindle speed range and collet condition before installation.

Installation Notes

Installation is performed by qualified machinists or CNC operators. Power down and lock out the machine spindle before inserting or removing the end mill from the collet or tool holder. Use a calibrated torque wrench on collet nuts per the machine or tooling system manufacturer specifications. Inspect the shank and cutting edges for damage before each use; solid carbide tooling is brittle and should not be subjected to side-loading beyond rated parameters.