Service Metal ser1008 Eccentric Reducer 10x8 Carbon Steel

Product Description

The SERVICE METAL ser1008 is a 10 inch x 8 inch carbon steel eccentric reducer designed for butt weld piping installations. Eccentric reducers transition between two different pipe diameters while keeping one side of the pipe run flat, which prevents air pockets in liquid lines and maintains consistent flow alignment in horizontal runs. This fitting is used in industrial and commercial piping systems and is installed by licensed pipefitters, plumbers, and mechanical contractors working with carbon steel piping. At 21.60 pounds, the ser1008 is a substantial fitting suited for heavy-duty piping applications requiring a reliable welded connection.

This eccentric reducer is appropriate for commercial and industrial piping systems where a 10 inch to 8 inch transition is required. The eccentric design is commonly specified in horizontal liquid piping runs to maintain a level bottom, which is critical for proper drainage and preventing trapped air. It is also used in pump suction lines to avoid cavitation caused by air entrainment. This fitting is intended for professional installation in systems where butt weld connections are standard practice.

Key Features

• Eccentric design keeps one side of the pipe flat for proper alignment in horizontal runs
• 10 inch x 8 inch nominal size handles large-diameter piping transitions
• Carbon steel butt weld construction provides a strong, permanent joint
• Weighs 21.60 pounds, indicating heavy wall construction suitable for demanding applications
• Butt weld end prep allows full-penetration welds for high-integrity connections

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 10 inch x 8 inch carbon steel butt weld piping systems in commercial and industrial applications.

Installation Notes

Installation should be performed by a qualified pipefitter or welder with appropriate certifications for carbon steel butt weld work. Power down and depressurize the system completely before cutting into any existing piping. Proper fit-up, root pass, and weld procedure should follow applicable codes such as ASME B31.3 or B31.1 depending on the service. Do not use this fitting in systems or pressures outside the rated parameters for the specified pipe schedule and material grade.

Technical Specifications

• Fitting Size: 10 inches x 8 inches
• Material: Carbon Steel
• Connection Type: Butt Weld
• Type: Eccentric Reducer
• Item Weight: 21.60 pounds
• Origin: Import

Standard Information

• Brand: SERVICE METAL
• Manufacturer Part Number: ser1008