Service Metal 3mcplhs02.0 Half Coupling 2 in Class 3000

Product Description

The SERVICE METAL 3mcplhs02.0 is a Class 3000 forged carbon steel half coupling designed for socket weld connections in high-pressure piping systems. Manufactured to ASME B16.11 standards and produced from ASTM A105/ASME SA105 carbon steel, this fitting is built for demanding industrial and commercial piping applications. The socket weld end connection provides a strong, leak-resistant joint suitable for high-pressure and high-temperature service. At 2 inches nominal size with an extra-heavy (XH) wall thickness and Schedule 80S rating, it delivers the structural integrity required in critical piping runs. Licensed pipefitters and pipe welders are the primary installers for this type of fitting.

This half coupling is suited for use in industrial process piping, steam systems, oil and gas lines, and commercial mechanical installations where Class 3000 rated fittings are specified. It is applicable wherever a branch connection or end termination point is needed on a 2-inch pipe header. The socket weld configuration makes it well matched for smaller-diameter, high-pressure lines where threaded connections are not preferred and butt-weld fittings are oversized for the application.

Key Features

• Class 3000 pressure rating suitable for high-pressure piping service
• Forged carbon steel construction per ASTM A105/ASME SA105 material specification
• Socket weld by socket weld end connection for strong, leak-resistant joints
• Conforms to ASME B16.11 forged fittings standard
• Extra-heavy (XH) wall thickness at Schedule 80S
• Half coupling profile for branch outlet or end connection use

Compatibility

Designed as an OEM-style forged steel socket weld half coupling for 2-inch Class 3000 piping systems conforming to ASME B16.11 requirements.

Installation Notes

Installation should be performed by a licensed pipefitter or qualified welder in accordance with applicable codes including ASME B31.1 or B31.3 as required by the system. Depressurize, isolate, and drain the piping system completely before cutting in any fitting. Socket weld fittings require a small gap between the pipe end and the socket seat prior to welding to allow for thermal expansion during the weld process. Post-weld inspection and pressure testing should follow the requirements of the governing piping code for the system.

Technical Specifications

• Fitting Type: Half Coupling, Straight
• Nominal Size: 2 inches
• Pressure Rating: Class 3000
• End Connection: Socket Weld x Socket Weld
• Material: Carbon Steel
• Material Specification: ASTM A105/ASME SA105
• Process: Forged
• Applicable Standard: ASME B16.11
• Schedule: 80S
• Thickness: Extra Heavy (XH)
• Weight: 2.05 pounds

Standard Information

• Brand: SERVICE METAL
• Manufacturer Part Number: 3mcplhs02.0