Sersuamr ser4/0-4/0-4/0-2/0mr 4/0 Awg Ser Aluminum Cable

Product Description

The SERSUAMR ser4/0-4/0-4/0-2/0mr is a 4/0-4/0-4/0-2/0 AWG aluminum alloy, round-configuration Type SER service entrance cable rated for 600 volts. It features stranded aluminum alloy conductors with a PVC jacket, offering a temperature rating of 90 degrees C in both dry and wet environments. Ampacity is 150 amps at 60 degrees C, 180 amps at 75 degrees C, and 205 amps at 90 degrees C. This cable is sold cut to length, making it suitable for job-specific service entrance runs. Licensed electricians and electrical contractors install this cable in residential and light commercial applications where aluminum service entrance wiring is required by design or code.

Type SER cable in this conductor configuration is commonly used for 150-amp or larger residential service entrance installations, connecting the utility meter base to the main distribution panel. The 4/0-4/0-4/0-2/0 AWG configuration provides two 4/0 AWG phase conductors, one 4/0 AWG neutral, and a 2/0 AWG ground. The round jacket profile eases conduit pulling and direct-burial or above-ground service entrance routing. This product is available cut to length to minimize waste on single-run jobs.

Key Features

• Stranded aluminum alloy conductors for flexibility and pull strength
• 600-volt rating suitable for standard utility service entrance voltages
• 90 degrees C temperature rating for dry and wet locations
• Ampacity up to 205 amps at 90 degrees C for high-demand residential and light commercial loads
• PVC outer jacket for abrasion and moisture resistance
• Round cable geometry simplifies conduit installation and cable management
• Cut-to-length availability reduces material waste on single-run service entrance jobs

Compatibility

Designed as an OEM-style replacement or new-installation conductor for residential and light commercial service entrance applications requiring Type SER aluminum cable in a 4/0-4/0-4/0-2/0 AWG round configuration rated at 600 volts.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Disconnect and lock out all utility power before working on or near service entrance conductors. Use aluminum-rated lugs and antioxidant compound on all terminations per manufacturer and NEC requirements. Verify conduit fill calculations comply with NEC Chapter 9 before pulling cable.

Technical Specifications

• Conductor Size: 4/0 AWG (4/0-4/0-4/0-2/0 configuration)
• Voltage Rating: 600 volts
• Ampacity: 150 amps at 60 degrees C, 180 amps at 75 degrees C, 205 amps at 90 degrees C
• Temperature Rating: 90 degrees C (dry and wet)
• Conductor Material: Aluminum alloy, stranded
• Jacket Material: PVC
• Cable Type: SER
• Outer Diameter: 1503 mil (approximately 1.503 inches)
• Weight: 968 pounds per thousand feet

Standard Information

• Brand: SERSUAMR
• Manufacturer Part Number: ser4/0-4/0-4/0-2/0mr