Securitron -u.s. SFP-1/2CLMM15 Stop Filler Plate

Product Description

The SECURITRON -U.S. SFP-1/2CLMM15 is a stop filler plate designed for use with the MM15 series electromagnetic door locks. This accessory fills the gap between the magnet body and the door stop when a centerline mounting configuration is used with a half-inch offset. It provides a clean, finished appearance and ensures proper surface contact between the lock body and mounting surface. Installation is typically performed by access control technicians or licensed electricians working on door hardware systems. This part ships as a single unit and is a direct accessory component within the MM15 mag lock product family.

This filler plate is intended for use in commercial or light-industrial access control installations where MM15 series mag locks are mounted in a centerline configuration. The half-inch centerline offset variant addresses common door frame geometries where a standard flush mount is not viable. It is used in both new installations and retrofit projects to achieve correct magnet-to-armature alignment and consistent holding force across the door leaf.

Key Features

• Designed for centerline mounting configurations on MM15 series mag locks
• Half-inch offset accommodates specific door frame and stop geometries
• Provides proper surface contact between magnet body and mounting surface
• Clean finished appearance for professional installations
• Sold as a single unit for targeted replacement or new install use

Compatibility

Designed for use with the MM15 series electromagnetic locks in a half-inch centerline mounting application. No additional compatible model numbers were specified in the product data.

Installation Notes

Installation should be performed by a qualified access control technician or licensed electrician familiar with electromagnetic locking hardware. Disconnect and de-energize the mag lock system before removing or installing any mounting hardware or filler components. Follow applicable local building codes and NFPA 101 egress requirements when installing or modifying door locking hardware. Verify armature-to-magnet alignment after installation to ensure rated holding force is achieved.