Seco 17002195 Corner Radius End Mill 3/16 in 3 Flute Ticn

Product Description

The SECO 17002195 is a solid carbide corner radius end mill designed for high-performance milling in non-ferrous metal applications. Built to AN340 series specifications, it features a 3/16 inch diameter, a 0.0100 inch corner radius, and three right-hand spiral flutes with a 40-degree high helix angle. The TiCN PVD coating resists wear and reduces built-up edge when cutting aluminum, copper, brass, and similar materials. The centercutting geometry allows both plunge and peripheral cuts. This tool is a single-end, straight-shank design suited for use in CNC machining centers and manual mills with standard toolholders.

This end mill is intended for roughing and finishing operations on non-ferrous metals in precision machining environments. The short flute length and extended reach design make it well-suited for slots, pockets, and contour work where access depth is needed without sacrificing rigidity. The coarse pitch and high helix promote efficient chip evacuation in gummy or soft materials. Machinists and CNC operators working in job shops, production facilities, and toolrooms will find this tool appropriate for both light finishing passes and moderate material removal.

Key Features

• Solid carbide construction for rigidity and wear resistance in non-ferrous applications
• TiCN PVD coating reduces friction and extends tool life when machining aluminum and similar alloys
• 0.0100 inch corner radius protects cutting edge and improves surface finish at part corners
• 40-degree high helix angle promotes smooth cutting action and efficient chip removal
• Centercutting capability allows direct plunge entry without a pre-drilled hole
• Extended reach with 1-9/16 inch reach length accommodates deeper pocket work

Compatibility

Designed for use with standard toolholders accepting a 3/16 inch straight-cylindrical shank. Suitable for CNC machining centers and manual mills configured for right-hand cutting tools operating on non-ferrous metal workpieces.

Installation Notes

This tool is installed and changed by machinists or CNC operators following standard toolroom procedures. Ensure the machine spindle is fully stopped and the machine is in a safe state before changing tooling. Confirm the toolholder collet or chuck is clean and properly sized for the 3/16 inch shank before clamping. Verify runout does not exceed the 0.0005 inch TIR maximum after installation to maintain dimensional accuracy and tool life.