Seco 02823842 Milling Insert XOEX10T308FR-E05 F40M Carbide

Product Description

The SECO 02823842 is a solid carbide milling insert with ANSI and ISO designation XOEX10T308FR-E05, manufactured in the F40M fine-grain carbide grade. It carries a PVD-applied TiAlN and TiN dual-layer coating for extended tool life in demanding cutting applications. The insert features a parallelogram shape with a positive rake angle of 21.6 degrees, a sharp cutting edge style, and a 15-degree relief angle. With two cutting edges per insert and a right-hand orientation, it is designed for high-precision milling operations in ferrous and non-ferrous environments. Machinists and tooling technicians install this insert in compatible indexable milling cutter bodies.

This insert is suited for milling steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium. Its E05 chip breaker geometry supports stable chip evacuation across a range of feed rates and depths. The insert fits single-sided into the cutter body using a screw-hold method. It is well matched to high-production and precision milling applications in job shop and manufacturing environments where consistent surface finish and tight tolerances are required.

Key Features

• F40M fine-grain solid carbide grade with PVD TiAlN and TiN dual coating
• Positive rake angle of 21.6 degrees with sharp cutting edge style for reduced cutting forces
• E05 chip breaker for controlled chip formation across multiple workpiece materials
• 15-degree relief angle with 90-degree included angle for precise clearance geometry
• Maximum depth of cut: 0.3819 inches; cutting edge effective length: 0.3819 inches
• Right-hand, single-sided insert with screw holding method

Compatibility

Compatible with SECO cutter series R217.69-10 and R220.69-10 indexable milling cutter bodies.

Installation Notes

Installation is performed by tooling technicians or machinists during scheduled insert indexing or replacement. Power down and lock out the machine spindle before accessing the cutter body. Use the appropriate Torx or hex key as specified by the cutter body manufacturer to secure the insert screw. Inspect the insert pocket seating surface for chips or debris before installing a new insert to ensure proper seating and edge geometry.