Seco 02656119 Milling Insert XOMX060204R-M05 MP3000 Carbide

Product Description

The SECO 02656119 is a solid carbide milling insert with ANSI and ISO designation XOMX060204R-M05, manufactured to the MP3000 grade with a micrograin carbide substrate. The insert features a TiAlN PVD coating suited for high-temperature cutting applications. It carries a parallelogram shape with a 90-degree included angle, a positive rake geometry at 20.2 degrees, and a 15-degree relief angle. The cutting edge is honed for consistent entry into the workpiece. Two cutting edges are available on this single-sided insert. It is installed by machinists and tooling technicians in CNC milling operations where precision indexable tooling is required.

This insert is designed for milling steel, stainless steel, and hard materials, classified under ISO material groups P, M, and H. The M05 chip breaker geometry supports controlled chip formation during medium-duty milling passes. The right-hand cutting orientation and screw-holding method make it compatible with standard indexable milling cutter bodies in the R217.69-06 cutter series. It is suited for both roughing and semi-finishing operations on ferrous and hard alloy workpieces in production and job-shop environments.

Key Features

• MP3000 micrograin solid carbide substrate with TiAlN PVD coating for heat and wear resistance
• XOMX parallelogram insert shape with 90-degree included angle and positive rake geometry
• Honed cutting edge style for improved edge strength on steel and hard materials
• M05 chip breaker for controlled chip evacuation during medium milling passes
• Two cutting edges per insert for extended tooling value
• Right-hand orientation with screw-lock holding method for secure seating in cutter body

Compatibility

Compatible with R217.69-06 series indexable milling cutter bodies. Insert designation XOMX060204R-M05 conforms to ISO and ANSI standards and is identified by insert size code 060204 within the XOMX-06 series.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician with the spindle fully stopped and machine power locked out before changing inserts. Use the correct torx or hex key to seat the clamping screw to the cutter body manufacturer's specified torque as indicated in the cutter body documentation. Inspect the insert pocket and seating surface for chips or debris before installing the new insert. Always verify insert orientation and hand designation match the cutter body before resuming operation.