Seco 02587630 Corner Radius End Mill 10mm 4 Flute Carbide

Product Description

The SECO 02587630 is a solid carbide corner radius end mill designed for high-performance milling in hard materials. Part of the JHP170 series, it features a 10 mm cutting diameter, 1 mm corner radius, and four right-hand spiral flutes with a 50-degree high helix angle. The MEGA-64 coating provides wear resistance suited to hardened steels and other difficult-to-machine materials. With an overall length of 65 mm and a 10 mm straight cylindrical shank, this single-end tool is built for precision roughing applications requiring controlled material removal and extended tool life in demanding machining environments.

This end mill is suited for CNC milling operations on hard materials, typically defined by material code H, including hardened steels encountered in die, mold, and tooling work. The 10 mm length of cut, 22 mm reach length, and 9.40 mm neck diameter allow access to moderate-depth features while maintaining rigidity. The extended reach geometry makes it appropriate for cavities and contoured surfaces where a standard-length tool cannot reach. It is installed by machinists and CNC operators in shop and production environments.

Key Features

• Solid carbide construction for rigidity and wear resistance in hard material applications
• MEGA-64 coating optimized for high-hardness workpiece materials
• 1 mm corner radius reduces corner chipping and improves surface finish at workpiece edges
• 4 right-hand spiral flutes with 50-degree high helix for efficient chip evacuation
• Center-cutting geometry allows plunge and ramp entry
• Extended reach with 22 mm reach length and reduced 9.40 mm neck diameter for access to deeper features

Compatibility

Designed as an OEM-style solid carbide corner radius end mill for use in standard straight-bore ER collet chucks and end mill holders accepting a 10 mm shank diameter with h5 shank tolerance.

Installation Notes

Installation is performed by a qualified machinist or CNC operator. Ensure the machine spindle and tool holder are clean and free of debris before seating the shank. Torque the collet nut or set screw to the tool holder manufacturer specification. Verify runout does not exceed the 0.01 mm maximum TIR before beginning the cut, and confirm spindle direction is set to right-hand rotation to match the flute and cutting direction of this tool.