Seco 02422144 Indexable Face Mill 3.15 in 6 Flutes

Product Description

The SECO 02422144 is a 45-degree indexable chamfer angle face mill designed for precision facing operations in industrial machining environments. Part of the R220.53 series, this right-hand cutter accepts six SE X 1204 inserts secured by screw-holding and delivers a minimum cutting diameter of 3.15 inches with a maximum cutting diameter of 3.62 inches. Maximum depth of cut is 0.236 inches. The tool features a 1-inch arbor hole, through-coolant capability, and a maximum spindle speed of 11,700 RPM. It is installed and operated by CNC machinists and tooling technicians working on milling centers in production and job-shop settings.

This face mill is suited for facing operations on flat surfaces in both production and custom machining applications. The R220.53 series cutter style with negative radial and positive axial rake geometry is commonly applied when working with steel and similar materials where controlled chip formation and surface finish consistency are priorities. Through-coolant delivery supports extended insert life and heat management at higher feed rates.

Key Features

• 45-degree chamfer angle geometry optimized for facing operations
• Accepts 6 SE X 1204 inserts with screw-holding method for positive seating
• Through-coolant capability for improved heat management and insert longevity
• Maximum spindle speed of 11,700 RPM supports high-productivity machining
• Right-hand cut with negative radial and positive axial rake for controlled chip action
• Normal pitch configuration with 6 flutes for balanced cutting performance

Compatibility

Designed for use with SE X 1204 series inserts. This cutter is part of the SECO R220.53 series and requires a 1-inch arbor interface. Confirm spindle taper and arbor compatibility with the host machine before installation.

Installation Notes

Installation of indexable face mills should be performed by qualified CNC machinists or tooling technicians. Power down and lock out the machine spindle before mounting or changing inserts per OSHA lockout/tagout requirements. Ensure the arbor bore, keyway, and retention hardware are clean and free of damage before seating the cutter. Verify maximum RPM does not exceed the 11,700 RPM rating of this tool body when programming spindle speeds.