Seal-tite 1373R-021006 Right End Boot 2x10 6in with Extension

Product Description

The SEAL-TITE 1373R-021006 is a right-end duct boot designed for residential and light commercial HVAC duct systems. This fitting connects rectangular duct runs to floor, wall, or ceiling registers and transitions airflow toward the right side of the installation. The boot measures 2 inches by 10 inches at the duct collar and includes a 2-inch extension, which provides additional depth for installations where standard clearance between the duct and the finished surface is limited. HVAC installers and sheet metal technicians select this fitting when layout geometry requires a right-hand termination point at the register location.

This boot is suited for forced-air heating and cooling systems in residential new construction and retrofit applications. The right-end configuration is commonly used when duct runs approach a register box from the left, requiring the boot to terminate on the right side. The 2-inch extension accommodates deeper subfloor or wall cavity conditions, giving installers the clearance needed to properly seat and fasten the register grille without modification.

Key Features

• Right-end boot configuration for directional duct terminations
• 2 inches x 10 inches duct collar opening for standard rectangular duct connections
• Integrated 2-inch extension accommodates deeper floor or wall cavity installations
• Designed for forced-air HVAC distribution systems in residential and light commercial applications

Compatibility

Designed as an OEM-style replacement and new-installation fitting compatible with standard 2-inch by 10-inch rectangular duct systems requiring a right-end boot termination.

Installation Notes

Installation of duct boots is typically performed by licensed HVAC technicians or sheet metal contractors. Before installing or replacing a duct boot, shut down the air handling unit and confirm the system is depressurized. Secure the boot to the duct run using approved sheet metal screws and seal all joints with UL 181-listed duct tape or mastic sealant per local mechanical code requirements. Do not obstruct the register opening or compress the extension during fastening.

Technical Specifications

• Duct Collar Size: 2 inches x 10 inches
• Extension Length: 2 inches
• End Orientation: Right

Standard Information

• Brand: SEAL-TITE
• Manufacturer Part Number: 1373R-021006