Schneider Electric LC1K0910M7 Iec Contactor 3 Pole No

Product Description

The SCHNEIDER ELECTRIC LC1K0910M7 is a 3-pole IEC contactor with a normally open (NO) auxiliary contact configuration, designed for controlling electrical loads in industrial and commercial power distribution systems. It operates on a coil voltage of 220 to 230 volts AC at 50/60 Hz, making it suitable for standard international line voltages. This contactor is installed by licensed electricians and industrial maintenance technicians in motor control centers, panel boards, and machinery control circuits. It carries UL Listed and CSA certifications and is RoHS compliant, confirming it meets both North American and international safety standards.

The LC1K0910M7 is applied in light industrial, commercial, and OEM equipment installations where a compact IEC-style contactor is required for motor starting, load switching, or circuit control. Its 3-pole configuration handles three-phase loads, and the NO auxiliary contact supports control circuit logic and status indication. Typical installation environments include motor control panels, HVAC equipment control cabinets, and automated machinery enclosures.

Key Features

• 3-pole design rated for three-phase load switching applications
• Normally open (NO) auxiliary contact for control circuit integration
• Coil voltage of 220 to 230 volts AC at 50/60 Hz for international compatibility
• UL Listed and CSA certified for North American installations
• RoHS compliant construction
• Compact footprint: 2.4 inches height, 2.6 inches width, 1.9 inches length

Compatibility

Designed as an OEM-style replacement IEC contactor for use in three-phase motor control and load-switching applications requiring a 3-pole NO configuration with a 220 to 230 volt AC coil.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC and applicable local electrical codes. De-energize and lock out the panel or control circuit before removing or installing the contactor. Verify coil voltage at the control circuit matches the 220 to 230 volt AC rating before energizing. Confirm all line and load terminal connections are secure and that the auxiliary contact wiring matches the intended control logic.