Schneider Electric LC1K0901F7 Iec Contactor 3 Pole 110V Nc

Product Description

The SCHNEIDER ELECTRIC LC1K0901F7 is a 3-pole IEC contactor with a normally closed (NC) auxiliary contact configuration, rated for a coil voltage of 110 volts AC at 50/60 Hz. Designed for use in industrial motor control and power switching applications, this contactor operates by energizing its coil to open or close the main power circuit across three poles. The NC auxiliary contact provides status feedback or interlocking capability within control panel wiring. At 0.4 pounds, the unit is compact enough for tight enclosure layouts. Licensed electricians and industrial controls technicians are the typical installers for this device.

This contactor suits residential and light commercial control panels, motor starters, and automation panels where IEC-standard components are specified. It is commonly installed in conveyor systems, pump controls, fan motor circuits, and similar three-phase or single-phase load switching applications. The 110-volt AC coil makes it a practical fit for North American and European control circuits operating at that voltage level. The NC auxiliary contact is useful in safety interlock circuits and status-monitoring wiring within the same panel.

Key Features

• 3-pole main contact configuration for three-phase or multi-line switching
• Normally closed (NC) auxiliary contact for interlocking or status feedback
• 110-volt AC coil rated at 50/60 Hz for broad frequency compatibility
• Compact footprint: 1.8 inches tall, 1.8 inches wide, 2.2 inches deep
• Compliant with IEC 60947, UL Listed, CSA, RoHS, VDE 0660, BS 5424, and NF C 63-110

Compatibility

Designed as an OEM-style IEC contactor replacement for motor control and switching circuits requiring a 3-pole, NC auxiliary contact configuration with a 110-volt AC coil.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements and local codes. De-energize and lock out the control panel before removing or installing the contactor. Verify coil voltage at the control circuit terminals matches the 110-volt AC rating of this device before energizing. Confirm all main and auxiliary terminal connections are secure and torqued per the panel manufacturer or DIN rail assembly guidelines.