Schneider Electric LC1K0610M7 Iec Contactor 3 Pole 6A

Product Description

The SCHNEIDER ELECTRIC LC1K0610M7 is a 3-pole, non-reversible IEC contactor rated at 6 amps at 440 volts AC with a coil voltage of 220 to 230 volts AC at 50/60 Hz. It carries a normally open (NO) auxiliary contact configuration and is designed for motor control and load switching in industrial and commercial electrical panels. Licensed electricians and controls technicians install this device as part of motor starter assemblies, lighting control circuits, and general-purpose switching applications. At 0.4 pounds and a compact footprint, it fits standard DIN rail enclosures without requiring significant panel real estate.

This contactor is suited for light-duty motor control and switching circuits in commercial and industrial installations where IEC-rated devices are specified. Its non-reversible design makes it appropriate for single-direction motor loads, HVAC compressor contactors, pump controls, and fan motor circuits operating on 220 to 230 volt AC control power. The 50/60 Hz dual-frequency rating allows use in both North American and international electrical systems, and its multi-standard certification supports a broad range of project specifications.

Key Features

• 3-pole configuration with normally open (NO) auxiliary contact for standard motor control wiring
• Non-reversible action suitable for single-direction load switching
• Coil voltage of 220 to 230 volts AC at 50/60 Hz for dual-frequency compatibility
• Rated at 6 amps at 440 volts AC for light-duty motor and switching loads
• Compact dimensions of 2.6 x 2.5 x 1.9 inches allow installation in tight panel layouts
• Multi-standard certified: UL Listed, CSA, IEC 60947, RoHS Compliant, VDE 0660, BS 5424, NF C 63-110

Compatibility

Designed as an OEM-style IEC contactor replacement for light-duty motor control and general-purpose switching applications requiring a 3-pole, non-reversible device with a 220 to 230 volt AC coil.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize and lock out the panel before installing or replacing the contactor. Verify coil voltage matches the control circuit supply before energizing. Confirm load amperage does not exceed the device rating before commissioning.