Schneider Electric LC1D50T6 Iec Contactor 3 Pole 480V

Product Description

The SCHNEIDER ELECTRIC LC1D50T6 is a three-pole, non-reversible IEC contactor rated for 480 volts AC at 60 Hz. It is designed for motor control and power switching applications in industrial and commercial electrical systems. The contactor includes both a normally closed (NC) and normally open (NO) auxiliary contact configuration, providing built-in signal and interlock capability without additional add-on blocks. Licensed electricians and industrial controls technicians install this device in motor control centers, panel boards, and machine control enclosures where IEC-style components are specified.

This contactor is suited for three-phase motor starter circuits, heating control panels, and general load switching in commercial and industrial facilities. Its non-reversible action makes it appropriate for single-direction motor loads and resistive or inductive load banks. The unit meets a broad range of international and North American standards, making it a viable choice for projects requiring multi-certification compliance including UL Listed and CSA approvals. It is compact enough to fit standard DIN-rail or direct-mount enclosures common in industrial control panels.

Key Features

• 3-pole, non-reversible contactor rated at 480 volts AC at 60 Hz
• Integrated NC and NO auxiliary contact configuration for interlock and status signaling
• Meets UL 508, UL Listed, CSA C22.2 No. 14, and EN/IEC 60947-4-1 standards
• Additional certifications include CCC, DNV, GL, GOST, LROS, RINA, Bureau Veritas, and RoHS Compliant
• Compact form factor: 4.8 inches height, 5.1 inches width, 3.3 inches length

Compatibility

Designed as an OEM-style IEC contactor replacement for three-pole motor control and load switching applications in industrial control panels where a 480V AC coil voltage and non-reversible operation are required.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 430 for motor branch-circuit and motor control wiring. De-energize and lock out the panel or motor control center before removing or installing the contactor. Verify coil voltage matches the control circuit supply before energizing. Confirm all auxiliary contact wiring is secure and that the enclosure rating meets the requirements of the installation environment.