Schneider Electric HOM1224L125PGCVP Load Center 125A 24 Circuit

Product Description

The SCHNEIDER ELECTRIC HOM1224L125PGCVP is a convertible main/main breaker load center rated for 125 amperes at 120/240 VAC on a 1-phase, 3-wire configuration. It supports up to 24 circuits across 12 spaces and accepts HOM-series plug-on breakers. The bus is tin-plated aluminum, and the welded sheet steel enclosure carries a NEMA 1 indoor rating with UL approval. The 10 kiloampere interrupting rating suits standard residential service applications. Electricians install this panel as a primary or sub-panel depending on how it is configured at the main lugs or main breaker position.

This load center is designed for residential and light commercial indoor installations where a flush or surface-mounted panel is required. The convertible main/main breaker design allows it to be set up as either a main breaker panel or a main lug panel depending on the project requirements. It accepts copper main wire from 6 AWG to 1 AWG and aluminum main wire from 6 AWG to 2/0 AWG, providing flexibility for common service entrance conductors.

Key Features

• Convertible main/main breaker design for flexible panel configuration
• Supports up to 24 circuits across 12 spaces with HOM-series plug-on breakers
• Combination flush and surface cover with latch — one cover fits both mounting styles
• Automatic flush adjustment is standard, with triple lead cover screws for fast installation
• Shutter-type twistouts for clean, controlled knockout removal
• UL listed; NEMA 1 rated for indoor use

Compatibility

Designed for use with HOM-series plug-on circuit breakers. Accepts copper main conductors from 6 AWG to 1 AWG and aluminum main conductors from 6 AWG to 2/0 AWG.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the service entrance conductors and verify absence of voltage before making any connections inside the enclosure. The enclosure is rated NEMA 1 for dry indoor locations only — do not install in wet or damp areas. Confirm conductor sizing and breaker selection comply with the load calculations for the installation.