Schneider Electric 9001SKT35LRR31 Led Indicating Light

Product Description

The SCHNEIDER ELECTRIC 9001SKT35LRR31 is a 24-volt LED press-to-test indicating light designed for industrial control panel applications. It features an octagonal red lens and a screw clamp connector for secure, vibration-resistant termination. The LED lamp type delivers long service life and low power draw compared to incandescent alternatives. The press-to-test function allows technicians to verify lamp and circuit integrity without interrupting the control system. At 0.5 pounds and compact panel-mount dimensions, this indicator integrates cleanly into new builds and retrofit installations. It meets a broad range of electrical safety standards including UL 508 and NEMA 4X, making it suitable for demanding environments.

This indicating light is used in industrial control panels, machine tool enclosures, and automation equipment where a visual status signal is required. The red lens is conventionally used to indicate fault, stop, or alarm conditions. The screw clamp connector suits both stranded and solid conductors, a practical advantage during panel wiring. Its vibration-resistant construction makes it appropriate for installations near motors, compressors, or other equipment that generates mechanical vibration. Licensed electricians and panel builders are the primary installers of this device.

Key Features

• 24-volt LED lamp for low power consumption and extended service life
• Press-to-test function verifies lamp and circuit integrity quickly
• Octagonal red lens for clear, color-coded status indication
• Screw clamp connector provides secure, tool-assisted wire termination
• Vibration-resistant construction for use near motors and compressors
• Rated NEMA 1/2/3/3R/4/4X/12/13 for broad environmental suitability

Compatibility

Designed as an OEM-style panel-mount indicating light for industrial control enclosures rated NEMA 1 through 13, including NEMA 4X wet and corrosive environments. Compatible with 24-volt AC or DC control circuits as appropriate to the installed configuration.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 409 for industrial control panels and any applicable local codes. De-energize the control panel and verify zero voltage with a meter before installing or removing the indicator. Use the screw clamp connector with an appropriate flat-blade screwdriver sized to the terminal; do not overtighten. Confirm the supply voltage matches the 24-volt rating of this device before energizing the circuit.