Schneider Electric 8501XDO60V62 Nema Control Relay 6-pole

Product Description

The SCHNEIDER ELECTRIC 8501XDO60V62 is a DC-operated NEMA Type X control relay rated for 600 volts AC and 10 amps, featuring a 6-pole, 6 normally open (NO) contact configuration. Designed for industrial control panel applications, it operates on a 115/125 volt DC coil voltage and uses screw-type, self-lifting pressure wire terminals for secure, tool-assisted connections. The convertible contact type adds flexibility for varied control circuit arrangements. Licensed electricians and industrial controls technicians are the primary installers of this relay in motor control, automation, and switching applications.

This relay is suited for industrial and commercial panel installations where DC-operated control switching is required. The 6-pole configuration supports simultaneous switching of multiple circuits from a single coil actuation, making it well-suited for machine control, process automation, and load-switching panels. Panel mounting is the standard installation method. The relay carries UL, CSA, and CE approvals, supporting use across North American and European-regulated installations.

Key Features

• DC-operated coil at 115/125 volts DC for compatibility with common DC control circuits
• 6-pole, 6 normally open (NO) contact configuration for multi-circuit simultaneous switching
• 600 volts AC, 10-amp contact rating for industrial control loads
• Convertible contact type allows reconfiguration to suit specific circuit requirements
• Screw-type, self-lifting pressure wire terminals for reliable, secure wiring connections
• UL, CSA, and CE approved for broad regulatory acceptance
• Panel mounting design for standard industrial enclosure installation

Compatibility

Designed as a NEMA Type X control relay for use in industrial control panels requiring DC-operated, 6-pole switching at 600 volts AC and 10 amps. No additional specific system or model compatibility data was provided in the product input.

Installation Notes

Installation should be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and any applicable local codes. De-energize and lock out all power to the control panel before removing or installing the relay. Use appropriately rated conductors and verify coil voltage matches the DC control circuit before energizing. Terminal screws should be tightened to the terminal manufacturer specification using a suitable insulated screwdriver.

Technical Specifications

• Voltage Rating (AC): 600 volts AC
• Current Rating: 10 amps
• Coil Voltage: 115/125 volts DC
• Operation Type: DC Operated
• Number of Poles: 6
• Contact Configuration: 6 Normally Open (NO)
• Contact Type: Convertible
• Terminal Type: Screw, Self-Lifting Pressure Wire
• Mounting: Panel Mount
• Approvals: UL, CSA, CE
• Height: 8.8066 inches
• Length: 22.3685 inches
• Width: 3.4671 inches
• Country of Origin: Mexico

Standard Information

• Brand: SCHNEIDER ELECTRIC
• Manufacturer Part Number: 8501XDO60V62