Schlage Commercial ND40RHO622 Nd Series Privacy Lever Lockset

Product Description

The SCHLAGE COMMERCIAL ND40RHO622 is a commercial-grade privacy lever lockset in the ND Series, finished in matte black (finish code 622). It features the Rhodes lever trim and ships complete with a 13-248 latch and 10-025 strike plate, making it a ready-to-install assembly for interior privacy applications. The lockset is designed for doors in commercial, institutional, and multi-family settings where a privacy function is required — meaning the door can be locked from the inside without a keyed cylinder. Licensed locksmiths, commercial door hardware installers, and general contractors are the primary trades that specify and install this hardware.

The ND40RHO622 is suited for interior commercial doors where occupancy privacy is needed, such as restrooms, single-occupancy offices, medical exam rooms, and similar spaces. The ND Series is a heavy-duty cylindrical lockset line built to ANSI/BHMA Grade 1 standards for high-traffic commercial use. The matte black finish provides a consistent aesthetic in modern commercial interiors. The included latch and strike allow for direct installation without sourcing additional components.

Key Features

• Privacy function — inside push-button or turn piece locks the lever; emergency release from outside
• Rhodes lever trim design for a clean, modern commercial appearance
• Matte black (622) finish for corrosion resistance and aesthetic consistency
• Ships as a complete assembly including 13-248 latch and 10-025 strike plate
• ND Series heavy-duty cylindrical construction suited for high-cycle commercial doors
• Sold individually (each) with a case quantity of 6 units available

Compatibility

Designed for use with commercial cylindrical door prep (standard ANSI A115 series bore pattern). Intended for interior doors in commercial, institutional, and multi-family applications requiring a privacy lockset function. Includes 13-248 latch and 10-025 strike as specified in the product configuration.

Installation Notes

Installation should be performed by a licensed locksmith or qualified commercial door hardware installer in accordance with applicable local building codes and the manufacturer's installation instructions. Verify door thickness and backset requirements before installation, as cylindrical locksets are available in different latch backset configurations. Do not force the lever or latch mechanism during installation. Confirm proper door alignment and strike plate positioning before finalizing fastener tightening.