Schaefer Brush 14442 Wire Tube Brush 3 in X 1/4 in Ss

Product Description

The SCHAEFER BRUSH 14442 is a stainless steel long-handle wire tube brush designed for cleaning the interior of small-diameter tubes, pipes, and bores. The brush head measures 3 inches in length with a 0.25-inch diameter, and the overall assembly extends 27 inches to reach deep into confined passages without requiring disassembly. The single-spiral fill pattern uses 0.005-inch stainless steel wire for consistent scrubbing action along the full brush length. Plumbers, HVAC technicians, and pipefitters reach for this style of brush when clearing scale, debris, or corrosion from tube interiors during maintenance or repair work.

This tube brush is suited for residential and light commercial applications where access to small-bore tubing is required. Typical use cases include cleaning condensate drain lines, refrigeration tubing, copper water lines, and heat exchanger tubes. The 27-inch overall length provides the reach needed for in-place cleaning without removing piping from service. The stainless steel construction stands up to water, mild chemicals, and the damp environments common in HVAC and plumbing service work.

Key Features

• 3-inch brush length with 0.25-inch diameter for small-bore tube cleaning
• 27-inch overall length for deep reach into tubes and passages
• Single-spiral fill pattern for uniform contact with tube walls
• 0.005-inch stainless steel wire filament resists corrosion and moisture
• Stainless steel shank at 0.13-inch diameter for rigidity and durability

Compatibility

Designed as a general-purpose replacement-style tube brush for use in small-bore pipe and tube cleaning applications common to HVAC, plumbing, and refrigeration service work.

Installation Notes

This brush is installed and used by hand or with a standard drill chuck compatible with the 0.13-inch shank diameter. Before cleaning any tube or pipe, shut off fluid flow and depressurize the line in accordance with applicable IPC or IFGC guidelines. Insert the brush with steady, even pressure to avoid bending the shank on tight bends or obstructions. Inspect the brush head before each use and replace if wire fill is visibly worn or deformed.