Satco 62/1266 Led Flush Mount Disc 21.5W 1200LM 3000K Bn

Product Description

The SATCO 62/1266 is a 10-inch round LED flush mount disc light from the NUVO by SATCO line, designed for residential and light commercial ceiling installations. Running at 21.5 watts and rated for 120 volts, the fixture delivers 1200 lumens at a 3000K warm white color temperature with a 90 CRI rating, producing light that renders colors accurately without distortion. The integrated LED source is dimmable and carries a 50,000-hour average rated life, reducing lamp change-out frequency in occupied spaces. The fixture is constructed of glass and steel with a brushed nickel finish. Licensed electricians and qualified installers handle typical ceiling fixture replacements and new installations.

This fixture suits residential living rooms, hallways, bedrooms, and similar interior spaces where a low-profile ceiling mount is required. The contemporary round disc profile fits standard junction box installations in ceilings with limited plenum clearance. At 9.84 inches in diameter and 1.41 inches in height, it fits flush against flat ceilings without exposed hardware bulk. The 3000K warm white output makes it appropriate for spaces where a neutral, inviting light quality is preferred over cooler daylight tones.

Key Features

• Integrated LED at 21.5 watts produces 1200 lumens — no separate bulb required
• 3000K warm white color temperature with 90 CRI for accurate color rendering
• Dimmable — compatible with standard LED-rated dimmer switches
• 50,000-hour average rated lamp life reduces maintenance frequency
• Glass and steel construction with brushed nickel finish
• Low-profile disc design at 1.41 inches mounting depth

Compatibility

Designed as a direct ceiling-mount flush disc fixture for standard residential junction box installations requiring a low-profile, integrated LED round fixture in a brushed nickel finish.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements and local codes. Turn off circuit power at the breaker panel and verify the circuit is de-energized with a non-contact voltage tester before wiring. Confirm the existing junction box is rated for the fixture weight and ceiling-mount application. If dimming is required, verify the dimmer switch is rated for LED loads to avoid flicker or reduced dimmer range.