Sandvik Coromant 6350716 Grooving Insert Corocut Mb

Product Description

The SANDVIK COROMANT 6350716 is a solid carbide grooving insert designed for precision groove turning and parting operations on CNC lathes and turning centers. Built to the CoroCut MB series standard, it carries a PVD-applied TiAlN/TiN coating over a Grade 1025 carbide substrate, delivering wear resistance and edge stability at elevated cutting temperatures. The insert features a 3 mm cutting width (0.1181 inches), a maximum depth of cut of 10 mm (0.3937 inches), and a 0.20 mm (0.0787 inch) corner radius. Right-hand orientation and a neutral rake angle make it suitable for standard radial grooving on a wide range of workpiece materials. Installation is performed by qualified machinists or toolroom technicians.

This insert is configured for the CoroCut MB insert style MB11 with an ISO code of MB11FA3000216R1025. It is suited for grooving, parting, and shallow profiling operations on small-diameter features where controlled chip evacuation and dimensional accuracy are critical. The 90-degree lead angle and neutral rake geometry support consistent entry into the workpiece. Maximum depth of cut range extends from 10 mm to 20 mm (0.3937 inches to 0.7874 inches) depending on application and toolholder configuration. This insert is classified as multi-use and is packaged individually.

Key Features

• Solid carbide substrate, Grade 1025, with PVD TiAlN/TiN coating for thermal and abrasion resistance
• 3 mm cutting width (0.1181 inches) for precise groove dimensioning
• Maximum depth of cut of 10 mm (0.3937 inches); range extends to 20 mm (0.7874 inches)
• 0.20 mm (0.0787 inch) corner radius for controlled edge geometry
• Right-hand, neutral rake configuration with 90-degree lead angle
• ISO code MB11FA3000216R1025 for straightforward toolholder matching
• Multi-use designation supports grooving, parting, and profiling applications

Compatibility

Designed for use with SANDVIK COROMANT CoroCut MB series toolholders accepting MB11 insert style. Confirm ISO code MB11FA3000216R1025 against toolholder documentation before installation.

Installation Notes

Insert seating and clamping should be performed by a qualified machinist following the toolholder manufacturer's torque and clamping procedures. Power down and lock out the machine spindle before changing inserts. Inspect the insert pocket and clamping screw for wear or damage before seating a new insert. Do not exceed the published depth-of-cut range for the toolholder and insert combination in use.