Sandvik Coromant 5758832 Groove Milling Tip Carbide 3 Flute

Product Description

The SANDVIK COROMANT 5758832 is a replaceable groove milling tip designed for use with CoroMill 327 milling systems. Manufactured from solid carbide with a PVD-applied TiAlN and TiN coating, this right-hand insert delivers controlled groove milling across a broad range of workpiece materials. It carries a manufacturer grade of 1025 and features three flutes with a 90-degree lead angle, supporting a maximum depth of cut of 0.1772 inches and a cutting diameter of 0.8543 inches. Licensed HVAC and mechanical trade professionals installing machine tooling, or machining contractors setting up CNC milling operations, will recognize the CoroMill 327 platform as a reliable system for precision groove work.

This tip is suited for groove milling applications in both light and medium-duty cutting scenarios. Primary workpiece materials include steel, stainless steel, cast iron, non-ferrous metals, and superalloys including titanium, covering material codes P, M, K, N, and S. Material grades supported span P10 through P30, M10 through M20, S10 through S20, and N10 through N20. The insert fits the CoroMill 327 Series tooling platform and is sized as an R12-22 20002 insert. It is packaged individually and sold in minimum order quantities of two units per order.

Key Features

• Carbide construction with PVD coating combining TiAlN and TiN layers for wear resistance
• Three-flute geometry with 90-degree lead angle and common chipbreaker for stable chip evacuation
• Maximum depth of cut of 0.1772 inches suitable for groove milling operations
• Cutting diameter and cutting width of 0.8543 inches with a functional length of 0.2244 inches
• Corner radius of 0.0078 inches for controlled edge engagement
• Compatible with steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium workpieces
• Meets ANSI standards; no coolant-through required

Compatibility

Designed as a replaceable milling tip for the SANDVIK COROMANT CoroMill 327 Series tooling system, insert size R12-22 20002, for use in groove milling applications across material codes P, M, K, N, and S.

Installation Notes

Installation is performed by qualified machinists or tooling technicians setting up CNC milling equipment. The machine spindle must be fully powered down and locked out before seating or replacing the milling tip. Use the appropriate torque wrench and clamping hardware specified for CoroMill 327 toolholders — do not over-tighten the clamping screw. Confirm correct insert orientation and right-hand cutting direction before resuming machine operation.