Sandvik Coromant 5755764 Turning Insert VBMT332-PF 5015

Product Description

The SANDVIK COROMANT 5755764 is a solid carbide turning insert in the VBMT332-PF 5015 style, part of the CoroTurn 107 series. It features a 35-degree diamond insert shape with a neutral hand orientation and a 1/32-inch (0.0313-inch) corner radius. The uncoated bright finish and PF chip breaker geometry make this insert well suited for finishing operations on steel and cast iron workpieces. With a 5015 manufacturer grade and a 3/8-inch inscribed circle, it delivers consistent edge geometry for precision turning applications. The insert is held by screw-type clamping and provides two cutting edges per insert, helping to reduce tooling cost per edge.

This turning insert is used in external turning operations on CNC lathes and turning centers across production and job-shop environments. The PF chip breaker is designed for light finishing cuts, particularly on steel (ISO material code P) and cast iron (ISO material code K). The CoroTurn 107 series is a screw-clamped insert system commonly found in operations requiring close tolerances and fine surface finishes. The ISO code for this insert is VBMT 16 04 08-PF 5015. Installation is performed by machinists and CNC operators in light manufacturing and precision machining facilities.

Key Features

• VBMT insert style with 35-degree diamond shape and 5-degree relief angle for clearance on finishing passes
• PF chip breaker geometry optimized for finishing cuts on steel and cast iron
• Uncoated solid carbide construction for sharp, consistent cutting edges
• Neutral hand orientation for flexible toolholder compatibility
• Screw-clamped holding method for secure, repeatable insert seating
• Two cutting edges per insert for extended tooling value

Compatibility

Compatible with CoroTurn 107 series screw-clamped toolholders designed for VBMT insert style. Primary workpiece materials are steel (ISO code P) and cast iron (ISO code K). ISO designation VBMT 16 04 08-PF 5015. Verify toolholder bore and clamping configuration before installation.

Installation Notes

Insert seating and replacement is performed by a machinist or CNC operator with the machine powered down and the spindle locked. Use the appropriate Torx or hex key to remove and reinstall the clamping screw per the toolholder manufacturer torque guidance. Inspect the insert pocket for debris or damage before seating the new insert. Handle carbide inserts carefully to avoid chipping the cutting edges prior to use.