Sandvik Coromant 5753636 TLG3 H13A Grooving Insert Solid Carbide

Product Description

The SANDVIK COROMANT 5753636 is a solid carbide grooving insert in the Top Lok series, designed for precision grooving and parting operations on CNC lathes and turning centers. This uncoated, right-hand insert carries ISO code TLG-3094R H13A and features a 0.094-inch (2.39 mm) cutting width with a maximum depth of cut of 0.150 inches (3.81 mm). The H13A grade uncoated carbide substrate is suited for applications where coating-free contact is preferred, such as non-ferrous materials and certain finishing passes. Licensed machinists and toolroom professionals install these inserts in compatible Top Lok toolholders during turning and grooving operations.

This insert is used in precision turning applications on manual and CNC lathes where controlled groove width and depth are required. With a neutral rake angle of 10 degrees and a corner radius of 0.0075 inches (0.19 mm), the 5753636 is appropriate for grooving operations on metals where dimensional accuracy and surface finish are critical. The multi-use designation means the insert can be repositioned or reindexed within compatible toolholder seats, making it a practical choice for production and job-shop environments alike.

Key Features

• Solid carbide H13A grade construction — uncoated bright finish for non-ferrous and finishing applications
• 0.094-inch (2.39 mm) cutting width for consistent, repeatable groove dimensions
• Maximum depth of cut of 0.150 inches (3.81 mm); depth of cut range 0.118 to 0.157 inches (3.00 to 4.00 mm)
• Corner radius of 0.0075 inches (0.19 mm) for controlled edge geometry
• Neutral rake, 10-degree rake angle for stable cutting action
• Multi-use insert design compatible with Top Lok series toolholders

Compatibility

Designed for use with SANDVIK COROMANT Top Lok series toolholders accepting insert seat size 3. ISO code TLG-3094R H13A. Verify toolholder seat size and insert hand orientation before ordering.

Installation Notes

Installation is performed by a qualified machinist or toolroom technician. Always de-energize and lock out the machine before changing inserts. Seat the insert fully into the toolholder pocket and verify clamping torque per the toolholder manufacturer specification. Inspect the insert seat for chips or contamination before installation to ensure proper seating and dimensional accuracy.