Sandvik Coromant 5753513 Grooving Insert TLG3 1125

Product Description

The SANDVIK COROMANT 5753513 is a solid carbide grooving insert designed for precision external grooving and turning operations on CNC lathes and turning centers. Part of the Top Lok series, this right-hand insert carries a manufacturer grade of 1125 with a dual-layer PVD coating of TiCrAlN and TiAlN for improved wear resistance and thermal stability at elevated cutting speeds. The insert delivers a cutting width of 0.097 inches (2.46 mm) and a maximum depth of cut of 0.150 inches (3.81 mm). A neutral rake angle of 10 degrees and a corner radius of 0.0125 inches (0.32 mm) make it suitable for finishing and semi-finishing passes on a range of workpiece materials. Licensed machinists and CNC operators in production and job-shop environments are the primary installers.

This insert is intended for use in Top Lok compatible toolholders on CNC turning and grooving setups handling moderate to tight groove tolerances. The ISO code for this insert is TLG-3097R 1125, and the manufacturer catalog number is TLG-3097R 1125. With a cutting height of 0.344 inches (8.74 mm) and an overall length of 0.634 inches (16.10 mm), it fits insert seat size 3. The maximum depth of cut range extends from 3.00 mm to 4.00 mm (0.150 to 0.200 inches), covering common grooving depth requirements in precision component machining. This is a multi-use tool suitable for repeated grooving cycles.

Key Features

• Solid carbide substrate with PVD-applied TiCrAlN and TiAlN dual-layer coating for extended tool life
• Cutting width of 0.097 inches (2.46 mm) for precise groove sizing
• Maximum depth of cut of 0.150 inches (3.81 mm); range extends to 0.200 inches (4.00 mm)
• Corner radius of 0.0125 inches (0.32 mm) for controlled edge geometry on finishing passes
• Neutral rake with 10-degree rake angle for balanced cutting forces
• Right-hand orientation; fits Top Lok insert seat size 3

Compatibility

Designed for use with Top Lok series compatible grooving toolholders accepting insert seat size 3. ISO code TLG-3097R 1125 applies. Verify toolholder seat size and clamping system before installation.

Installation Notes

Installation should be performed by a qualified CNC machinist or tooling technician with the machine in a full stop, spindle off, and all axes locked before indexing or replacing inserts. Use the appropriate Top Lok clamping key or torque wrench as specified by the toolholder manufacturer to secure the insert without over-tightening. Inspect the insert pocket and seating surface for chips or debris before seating the new insert. Confirm correct hand orientation and depth stop settings before resuming cutting operations.