Sandvik Coromant 5748962 Turning Insert H10 Carbide

Product Description

The SANDVIK COROMANT 5748962 is a solid carbide, uncoated turning insert designed for precision metal cutting in CNC and manual turning applications. Manufactured to the ISO designation SCGX 09 T3 08-AL H10, this insert features a 90-degree square shape with a neutral hand orientation and a 1/32 inch (0.0313 inch) corner radius. The H10 uncoated carbide grade is specifically engineered for cutting non-ferrous metals, with secondary suitability for superalloys and titanium. With four available cutting edges and screw-in holding, it delivers consistent performance across high-volume turning operations. It belongs to the CoroTurn 107 series and follows the AL chip breaker geometry.

This insert is intended for use on CNC lathes and turning centers in both production and job-shop environments. The primary workpiece material designation is non-ferrous metals, including aluminum and copper alloys. Secondary applications cover superalloys and titanium. The CoroTurn 107 series is commonly applied in external turning, facing, and profiling operations where close tolerances and surface finish quality are critical. Licensed machinists, CNC operators, and toolroom technicians are the typical installers and users of this insert.

Key Features

• H10 uncoated solid carbide grade optimized for non-ferrous and superalloy turning
• Square insert shape (SCGX) with 90-degree included angle and 7-degree relief angle
• Four cutting edges per insert for extended tooling economy
• AL chip breaker geometry designed for non-ferrous metal applications
• Screw-in holding method with through-hole diameter of 0.1732 inch (4.40 mm)
• Neutral hand orientation — compatible with both left- and right-hand toolholders

Compatibility

Designed for use in CoroTurn 107 series toolholders that accept SCGX-style inserts with a screw-in holding method. Compatible primary workpiece materials are non-ferrous metals; secondary workpiece materials include superalloys and titanium. Verify toolholder pocket geometry and ISO designation SCGX 09 T3 08-AL H10 against your toolholder specification before ordering.

Installation Notes

Insert installation and indexing should be performed by a qualified machinist or CNC toolroom technician with the machine in a full stop, locked-out state. Use the appropriate Torx or hex key specified by the toolholder manufacturer to seat the clamping screw — do not overtighten. Inspect the insert pocket seat and clamping screw for wear or contamination before seating a new insert. Confirm correct insert orientation and edge engagement before resuming cutting operations.