Sandvik Coromant 5747165 Milling Insert H13A Solid Carbide

Product Description

The SANDVIK COROMANT 5747165 is a solid carbide milling insert designed for high-precision material removal in metalworking and machining applications. Manufactured to the H13A grade without any coating, this insert features a parallelogram shape with a positive rake angle of 9 degrees and two cutting edges. The insert size code is 160408, corresponding to a thickness of 4.00 mm and a width of 11.00 mm. It is suited for right-hand cutting operations and is held in place by a screw-type clamping method. Licensed machinists and CNC operators working in production environments rely on this insert for consistent edge performance on non-ferrous workpiece materials.

This insert is rated for primary use on non-ferrous metals, including aluminum alloys and other N-category materials per ISO classification. It fits the R790 cutter series and is appropriate for face milling and shoulder milling operations requiring a maximum depth of cut up to 12.00 mm. The chip breaker designation is NM, which is suited for neutral to light chip formation on non-ferrous applications. The ANSI and ISO catalog reference for this insert is R790-160408PH-NM H13A. This insert is sold individually but must be ordered in multiples of 10.

Key Features

• H13A grade solid carbide, uncoated (bright finish) for non-ferrous metal cutting
• Parallelogram insert shape with 90-degree included angle and corner-rounded cutting edge style
• Positive rake angle of 9 degrees for reduced cutting forces
• Two cutting edges per insert, single-sided configuration
• Maximum depth of cut of 12.00 mm for shoulder and face milling operations
• Screw-held mounting for secure, repeatable seating in compatible toolholders

Compatibility

Designed for use with the R790 cutter series. ANSI and ISO code: R790-160408PH-NM H13A. Compatible with right-hand toolholders accepting insert size code 160408 within the R790 platform. Applicable to material grades K20, N15, and S20 per ISO classification.

Installation Notes

Installation should be performed by a qualified machinist or CNC tooling technician. Before seating the insert, ensure the toolholder pocket is clean and free of debris to prevent seating errors that can cause insert fracture or poor surface finish. Use the appropriate torque tool and screw specified by the toolholder manufacturer when securing the clamping screw - do not over-tighten or substitute hardware. Inspect the cutting edge and pocket for wear or damage before each tool change.