Sandvik Coromant 5737204 Cutoff Insert 5mm T-max Q-cut

Product Description

The SANDVIK COROMANT 5737204 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. It carries insert style N151.2 with manufacturer grade 1125 and a TiAlN coating applied via PVD process, giving it strong wear and heat resistance for steel and stainless applications. The cutting width is 5.00 mm (0.1969 inches), the overall length is 6.80 mm (0.2677 inches), and the corner radius is 0.20 mm (0.0079 inches). The 5E chipbreaker geometry and 7-degree relief angle support reliable chip control during deep cutoff passes. This insert is seated and held by clamp in compatible T-Max Q-Cut toolholders.

The 5737204 fits into the T-Max Q-Cut series system, which is widely used in production turning environments for cutoff, grooving, and profiling work. Typical installations include job shop lathes and production cells handling bar stock, tube, and shaft components. The neutral lead angle and neutral hand make this insert suitable for straight plunge cutoff operations without lateral cutting force bias. It is part of SANDVIK COROMANT product group 151 and is sold individually with a minimum order quantity of 10 units.

Key Features

• Solid carbide construction with TiAlN PVD coating for extended tool life in steel and stainless materials
• 5.00 mm cutting width with a 0.20 mm corner radius for controlled parting passes
• Neutral lead angle and neutral hand for straight plunge cutoff without side-cutting bias
• 5E chipbreaker geometry paired with 7-degree relief angle for efficient chip evacuation
• Clamp-held seating in T-Max Q-Cut compatible toolholders, insert seat size 50
• Grade 1125 carbide substrate suited to a broad range of workpiece materials

Compatibility

Designed for use with SANDVIK COROMANT T-Max Q-Cut series toolholders that accept insert style N151.2 with insert seat size 50. Confirm toolholder seat size and clamping method before ordering.

Installation Notes

Cutoff inserts should be installed by a qualified machinist or CNC toolroom technician. Power down and lock out the machine spindle before seating or removing the insert. Use the correct clamp torque specified by the toolholder manufacturer and inspect the insert seat for chips or debris before installation. Do not exceed the recommended feed and depth-of-cut parameters for the grade and chipbreaker geometry in use.