Sandvik Coromant 5736335 Grooving Insert Corocut 1-2

Product Description

The SANDVIK COROMANT 5736335 is a solid carbide grooving insert in the CoroCut 1-2 series, engineered for precision external grooving and parting operations on CNC lathes and turning centers. This neutral-hand insert carries a 5 mm cutting width and a maximum depth of cut of 23 mm, making it suitable for medium to deep grooving applications. The MT-CVD applied TiCN and Al2O3 coating delivers wear resistance and thermal stability under continuous and interrupted cuts. Insert size is J2 with a corner radius of 0.80 mm and a positive rake geometry through the TM chip breaker, which promotes controlled chip evacuation and reduced cutting forces on a range of workpiece materials.

This insert is intended for use in metalworking environments by machining professionals operating turning centers, CNC lathes, and similar equipment. The CoroCut 1-2 platform is designed for grooving, parting, and turning on external diameters. The neutral hand orientation allows use on both left- and right-hand toolholders within the compatible CoroCut 1-2 holder system. Typical applications include grooving to depth in steel, stainless, and other materials where consistent chip control and dimensional accuracy are required.

Key Features

• Solid carbide substrate with MT-CVD TiCN and Al2O3 coating for extended tool life
• 5 mm cutting width with a maximum depth of cut of 23 mm
• TM chip breaker geometry promotes positive rake cutting and chip control
• 0.80 mm corner radius suits finish and semi-finish grooving passes
• Neutral hand insert compatible with both left- and right-hand holders
• ISO code N123J2-0500-0008-TM 3115 for precise toolholder matching

Compatibility

Designed for use with SANDVIK COROMANT CoroCut 1-2 series toolholders that accept J2 insert seat size. ISO code N123J2-0500-0008-TM 3115 can be used to confirm holder and insert seating compatibility.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician with the machine in a fully stopped and locked-out state before any insert change. Use the recommended SANDVIK COROMANT torx or hex key as specified for the CoroCut 1-2 clamping system — do not overtighten, as insert seat damage can result. Inspect the insert seat and clamping screw for wear or debris before seating the new insert. Follow the toolholder manufacturer guidelines for correct seating and torque procedure.