Sandvik Coromant 5735947 Grooving Insert 1mm Corocut Mb

Product Description

The SANDVIK COROMANT 5735947 is a solid carbide grooving insert designed for precision parting and grooving operations on CNC lathes and turning centers. Part of the CoroCut MB series, this insert features a PVD-applied TiAlN/TiN coating that provides wear resistance and extended tool life in demanding cutting conditions. It carries a manufacturer grade of 1025 and a neutral rake angle of 2 degrees, delivering consistent chip control in fine-pitch grooving applications. Machinists and CNC operators working in production turning environments install this insert when tight groove tolerances and surface finish are required.

This insert is sized for the MB-09 toolholder system and is suited for small-diameter internal grooving, face grooving, and parting applications where minimal cutting width is critical. It accommodates a maximum depth of cut of 1.5 mm and a cutting width of 1 mm, making it appropriate for precision grooving tasks on small-bore components in aerospace, medical, and general machining applications. The right-hand orientation determines correct toolholder seating and cutting direction.

Key Features

• Solid carbide construction with PVD TiAlN/TiN coating for wear resistance
• 1 mm cutting width suitable for fine-pitch grooves and small-diameter work
• Maximum depth of cut of 1.5 mm within a range of 0 to 2 mm
• Neutral rake with a 2-degree rake angle for stable cutting forces
• Right-hand insert orientation for correct CoroCut MB toolholder engagement
• ISO code MB-09FB100-00-14R 1025 for precise cross-referencing

Compatibility

Designed for use with MB-09 series CoroCut MB toolholders as specified by ISO code MB-09FB100-00-14R 1025. Verify toolholder seat size 9 compatibility before installation.

Installation Notes

Insert replacement should be performed by a qualified CNC machinist or toolroom technician with the machine in a locked-out, de-energized state. Use the appropriate insert key or torx driver specified for the CoroCut MB clamping system — do not over-torque the clamping screw. Confirm insert orientation matches the right-hand designation of the toolholder before resuming cutting operations. Inspect the insert seat for chips or debris prior to seating the new insert.