Sandvik Coromant 5735495 Grooving Insert MB07 1025 Carbide

Product Description

The SANDVIK COROMANT 5735495 is a solid carbide grooving insert from the CoroCut MB series, engineered for precision grooving operations on CNC lathes and turning centers. This right-hand insert carries a PVD-applied TiAlN/TiN coating for wear resistance and thermal stability during cut. It delivers a cutting width of 3.18 mm (0.1252 inches) and a maximum depth of cut of 1.80 mm (0.0709 inches), making it well suited to shallow, tight-tolerance grooving where dimensional consistency is critical. The manufacturer grade is 1025, and the insert features a neutral rake geometry with a 2-degree rake angle. Licensed machinists and CNC operators working in production turning environments are the primary installers.

This insert is designed for grooving applications requiring narrow cutting widths, including face grooving, OD grooving, and parting operations on small-diameter workpieces. The CoroCut MB platform targets applications where tool clearance is limited and repeatability across a run is essential. It is appropriate for both light interrupted cuts and continuous grooving passes within its rated depth range. The ISO code for this insert is MB-07G318-00-10R 1025, which also corresponds to the manufacturer catalog number.

Key Features

• Solid carbide substrate with PVD TiAlN/TiN coating for extended tool life
• Cutting width of 3.18 mm (0.1252 inches) for precise narrow grooving
• Maximum depth of cut of 1.80 mm (0.0709 inches)
• Right-hand cut orientation with neutral rake and 2-degree rake angle
• 90-degree lead angle suits perpendicular grooving setups
• Multi-use tool designation allows use across compatible CoroCut MB toolholders

Compatibility

Designed for use with compatible toolholders in the CoroCut MB series. ISO code MB-07G318-00-10R 1025 identifies the insert seat size as 7 and the cutting width as 3.18 mm. Confirm toolholder designation against the CoroCut MB interface specification before installation.

Installation Notes

Insert seating and clamping should be performed with the machine powered down and spindle locked. Use the torque wrench and screwdriver specified by the toolholder manufacturer to secure the insert clamp. Inspect the insert seat for chips or debris before seating; contamination in the pocket will cause insert tilt and premature edge failure. This insert is a single-use edge - do not attempt to regrind solid carbide grooving inserts.