Sandvik Coromant 5735434 Carbide Cutoff Insert 2mm Corocut Xs

Product Description

The SANDVIK COROMANT 5735434 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Carrying the MACR3200-T 1025 designation, it belongs to the CoroCut XS series and features a 2.00 mm cutting width with a 0-degree lead angle and right-hand orientation. The insert is manufactured from solid carbide with a PVD-applied TiAlN/TiN coating for wear resistance in demanding cut-off applications. With a maximum depth of cut of 8.20 mm, it suits small-diameter parting work where precision and edge integrity are critical. This insert is installed by CNC machinists and turning specialists in production and job-shop environments.

The SANDVIK COROMANT 5735434 is suited for parting, grooving, and profiling operations on small-diameter workpieces. The CoroCut XS series is optimized for use in Swiss-type and small-part turning machines where tight clearances and controlled chip evacuation matter. The MAC chipbreaker geometry supports efficient chip control in continuous cuts. This insert is held in place via a clamp-style insert holding method, compatible with CoroCut XS toolholders designed for size 3 inserts.

Key Features

• Solid carbide construction with PVD TiAlN/TiN coating for extended tool life
• 2.00 mm cutting width with 0-degree lead angle and right-hand orientation
• MAC chipbreaker geometry for controlled chip evacuation
• Maximum depth of cut of 8.20 mm suitable for small-diameter parting
• Corner radius of 0.05 mm for precise edge geometry
• Clamp-style holding method for secure insert retention in CoroCut XS holders

Compatibility

Designed for use with CoroCut XS series clamping toolholders accepting size 3 inserts. Refer to the SANDVIK COROMANT CoroCut XS toolholder selection guide for compatible holder designations.

Installation Notes

This insert is installed and replaced by qualified CNC machinists or tooling technicians. Power down and lock out the machine spindle before performing any insert change. Ensure the insert seat and clamp pocket are clean and free of chips before seating the insert. Handle carbide inserts with care to avoid chipping the cutting edges prior to use.