Sandvik Coromant 5735401 Grooving Insert Corocut Xs

Product Description

The SANDVIK COROMANT 5735401 is a solid carbide grooving insert designed for precision external grooving operations on CNC lathes and turning centers. It carries a grade 1025 PVD-applied TiAlN/TiN coating, which provides wear resistance and thermal stability during interrupted and continuous grooving cuts. The insert delivers a 0.75 mm cutting width with a maximum depth of cut of 2.5 mm, making it well suited for tight-tolerance groove profiles on small-diameter workpieces. The neutral rake angle of 6 degrees and MAG chip breaker geometry promote controlled chip evacuation in fine-pitch groove applications. Machining professionals and CNC setup technicians install this insert as part of the CoroCut XS modular tooling system.

This insert is intended for use in the CoroCut XS Series tooling system, which targets small-part turning and grooving applications on Swiss-type and conventional CNC lathes. The right-hand orientation and size 3 insert seat make it compatible with CoroCut XS holders and blades configured for that seat designation. Typical applications include grooving of medical components, watch parts, and other small precision turned parts where narrow groove widths and tight depth control are required. The ISO code for this insert is MAGR 3 075 1025.

Key Features

• Solid carbide substrate with grade 1025 PVD TiAlN/TiN coating for wear and heat resistance
• 0.75 mm cutting width and 2.5 mm maximum depth of cut for narrow, precise grooves
• MAG chip breaker geometry promotes chip control in small-part grooving
• Neutral rake with 6-degree rake angle suits a range of workpiece materials
• Corner radius of 0.05 mm (0.002 inches) for sharp-profile groove geometry
• Right-hand cut orientation, size 3 insert seat, CoroCut XS Series

Compatibility

Designed for use in SANDVIK COROMANT CoroCut XS Series toolholders and blades accepting a size 3 insert seat with MAG insert style. ISO catalog reference: MAGR 3 075 1025.

Installation Notes

This insert is installed and replaced by a CNC machinist or tooling technician. Power down and lock out the machine spindle before seating or removing inserts. Use the correct insert clamp and torque driver specified by the toolholder manufacturer — do not substitute fasteners. Verify insert seating and clamping security before resuming cuts, and inspect the insert seat for debris or damage each time the insert is changed.