Sandvik Coromant 5733395 Cutoff Insert 2mm Carbide Left Hand

Product Description

The SANDVIK COROMANT 5733395 is a solid carbide cutoff insert in the CoroCut XS series, designed for parting and grooving operations on CNC lathes and turning centers. This insert carries the MACL style designation with a 2.00 mm (0.0787 inch) cutting width and a 0-degree lead angle in a left-hand orientation. The 1025 manufacturer grade features a TiAlN/TiN coating applied by PVD process, providing wear resistance and thermal stability during high-speed cutoff work. Maximum depth of cut is 8.20 mm (0.3228 inch). It is installed using a clamp-style holding method and is suited for shops requiring precise, repeatable parting cuts in ferrous and non-ferrous materials.

This insert is used in precision turning applications where controlled chip formation and narrow kerf width are required. The MAC chipbreaker geometry supports chip control in light to moderate cutoff passes. The left-hand orientation makes it appropriate for specific tool block configurations and spindle setups where right-hand inserts would not engage correctly. Typical installers are CNC machinists and toolroom technicians working in production or job-shop environments. The insert seat size is 3, matching the corresponding CoroCut XS toolholder bodies designed for this seat size.

Key Features

• Solid carbide construction with PVD-applied TiAlN/TiN coating for extended tool life
• 2.00 mm cutting width (0.0787 inch) for narrow-kerf parting operations
• Maximum depth of cut 8.20 mm (0.3228 inch)
• Left-hand lead angle direction, 0-degree lead angle
• MAC chipbreaker for controlled chip evacuation
• 0.05 mm corner radius for edge definition on tight-tolerance parts
• Clamp-style insert holding for secure, repeatable seating

Compatibility

Designed for use with CoroCut XS series toolholders requiring an insert seat size 3 and MACL-style inserts. Refer to the SANDVIK COROMANT CoroCut XS toolholder selection guide to confirm correct holder pairing for left-hand orientation and 2 mm seat width.

Installation Notes

Installation should be performed by a qualified CNC machinist or toolroom technician. Power down and lock out the machine spindle before seating or removing the insert. Use the correct torque wrench or clamping key specified for the CoroCut XS holder to avoid over-tightening the clamp, which can fracture the insert body. Inspect the insert seat for debris or damage before seating a new insert.