Sandvik Coromant 5732733 Die Drill Bit 2.00 Mm Carbide

Product Description

The SANDVIK COROMANT 5732733 is a solid carbide die drill bit engineered for high-performance drilling in hardened materials. Designed for the HCx series, this 2.00 mm diameter bit features a 120-degree proprietary point angle and a bright, uncoated finish. With a flute length of 10.00 mm and an overall length of 30.00 mm, it delivers precise, controlled penetration in tight-tolerance applications. The 2-flute, right-hand cutting geometry supports efficient chip evacuation. Licensed machinists and toolroom technicians working on die work, mold components, and precision hardened steel applications rely on this bit for consistent results in demanding production environments.

This drill bit is suited for use in toolrooms, die shops, and precision machining environments where hardened steel and similarly difficult materials are the primary workpiece. Its compact 2.00 mm diameter makes it well-suited for small-diameter hole drilling in mold cavities, punch and die sets, and hardened tool steel components. The HCx series geometry is optimized for high-performance drilling where standard HSS tooling fails prematurely. It is intended for use in CNC machining centers and precision drill presses with adequate spindle rigidity.

Key Features

• Solid carbide construction rated for hardened materials and high-performance drilling cycles
• 120-degree proprietary point angle for accurate entry and reduced walking in hardened steel
• 2-flute right-hand cutting configuration promotes efficient chip clearance
• Bright, uncoated finish suitable for applications where coating compatibility is a concern
• Maximum drilling depth of 21.00 mm with a 3.5XD flute-to-diameter ratio
• HCx series designation indicates high-performance geometry optimized for hardened workpieces

Compatibility

Designed as an OEM-grade replacement die drill bit for use in CNC machining setups and precision toolrooms requiring a 2.00 mm solid carbide drill with a 2.00 mm shank diameter.

Installation Notes

Installation and use of this tooling should be performed by a qualified machinist or toolroom technician. Secure the shank firmly in a collet or drill chuck rated for the shank diameter before operation. Ensure the machine spindle is fully stopped and the control is in a safe state before changing tooling. Do not exceed the maximum drilling depth of 21.00 mm, and verify that the machine setup provides adequate rigidity to prevent deflection at this diameter.