Sandvik Coromant 5726734 Solid Carbide Grooving Tool

Product Description

The SANDVIK COROMANT 5726734 is a solid carbide internal grooving tool designed for precision groove cutting in bores and deep holes. Machined from solid carbide, it delivers the rigidity and wear resistance required for accurate grooving in tight internal geometries. The tool features a 6 mm shank diameter and a 1.5 mm groove width, with an overall length of 59.85 mm (approximately 2.36 inches). A projection of 1.80 mm allows controlled cutting depth, and the maximum hole depth capacity reaches 35.00 mm (approximately 1.38 inches). This tool is suited for CNC lathe and turning center applications where consistent groove geometry and bore integrity are critical. Machinists and toolroom professionals handling precision internal turning operations are the primary installers.

This grooving tool is intended for internal grooving operations in bores with a minimum hole diameter of 6.20 mm (approximately 0.244 inches). It is applicable in both production and job-shop environments running CNC lathes or manual turning equipment where small-diameter internal groove cutting is required. The solid carbide construction makes it appropriate for use in ferrous and non-ferrous materials where tool deflection must be minimized. It ships as a single unit and is compatible with standard 6 mm shank tool holders and collet systems.

Key Features

• Solid carbide construction for high rigidity and extended wear life in internal grooving applications
• 1.5 mm groove width for precise, repeatable groove geometry
• 6 mm shank diameter compatible with standard 6 mm collet holders and boring bar setups
• Maximum hole depth capacity of 35.00 mm (approximately 1.38 inches)
• Minimum bore entry diameter of 6.20 mm (approximately 0.244 inches) for tight internal access
• Overall length of 59.85 mm (approximately 2.36 inches) with a 1.80 mm projection

Compatibility

Designed as an OEM-style grooving tool for use in standard 6 mm shank tool holder systems on CNC lathes and turning centers requiring internal groove cutting in bores of 6.20 mm minimum diameter.

Installation Notes

Installation and tool changes should be performed by qualified machinists or toolroom technicians with the machine powered down and locked out per applicable OSHA lockout/tagout procedures. Secure the 6 mm shank firmly in the collet or holder to the tool manufacturer's specified clamping guidelines before running the spindle. Verify tool runout and projection before cutting to avoid deflection-related groove errors. Do not exceed the tool's stated maximum hole depth to prevent tool breakage or workpiece damage.